• Complex
  • Title
  • Keyword
  • Abstract
  • Scholars
  • Journal
  • ISSN
  • Conference
成果搜索
High Impact Results & Cited Count Trend for Year Keyword Cloud and Partner Relationship

Query:

学者姓名:锁要红

Refining:

Language

Submit

Clean All

Sort by:
Default
  • Default
  • Title
  • Year
  • WOS Cited Count
  • Impact factor
  • Ascending
  • Descending
< Page ,Total 5 >
Design and Analysis of a Hybrid Double-End Flat Heat Pipe-Fins Battery Thermal Management System at High-Rate Discharge Scopus
期刊论文 | 2025 | Heat Transfer
Abstract&Keyword Cite

Abstract :

Flat heat pipe (FHP) has been paid significant attention due to its exceptional thermal conductivity in the battery thermal management system (BTMS). However, only heat pipe cooling cannot meet battery cooling requirements at high discharge rates. In this study, a hybrid double-end FHP-fins (HDE-FHP-F) BTMS is designed, and its thermal dissipation performances are investigated. Then, the influences of l1–l2 (l1 and l2 are, respectively, the left and right condensing length of the double-end FHP) and the fin spacing on the FHP1 and FHP6 upon the thermal performances are, respectively, discussed. Finally, the auxiliary heating of the battery pack is carried out at low temperature. Numerical results show that the designed HDE-FHP-F BTMS (Design 1) has better thermal dissipation performance than the original one. The reduction of local fin number (Design 2) makes the maximum temperature (Tb,max) and the maximum temperature difference (ΔTb,max) of the battery pack meet the safety threshold at 8 C discharge rate (C-rate is the measurement of the charge and discharge current with respect to its nominal capacity) and, respectively, achieve a 2.62% and 42.20% reduction. Design 4 with auxiliary heating exhibits better temperature uniformity and consistency, and its Tb,min and ΔTb,max are successfully maintained within the safety threshold at low temperature. The proposed design provides valuable guidance for the battery thermal management scheme at high discharge rates. © 2025 Wiley Periodicals LLC.

Keyword :

auxiliary heating auxiliary heating double-end FHP-fins BTMS double-end FHP-fins BTMS fin spacing fin spacing lithium-ion battery lithium-ion battery thermal performance thermal performance

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 Suo, Y. , Zheng, H. , Zhang, H. et al. Design and Analysis of a Hybrid Double-End Flat Heat Pipe-Fins Battery Thermal Management System at High-Rate Discharge [J]. | Heat Transfer , 2025 .
MLA Suo, Y. et al. "Design and Analysis of a Hybrid Double-End Flat Heat Pipe-Fins Battery Thermal Management System at High-Rate Discharge" . | Heat Transfer (2025) .
APA Suo, Y. , Zheng, H. , Zhang, H. , Kuai, C. , Lang, Y. . Design and Analysis of a Hybrid Double-End Flat Heat Pipe-Fins Battery Thermal Management System at High-Rate Discharge . | Heat Transfer , 2025 .
Export to NoteExpress RIS BibTex

Version :

Electrochemical-Thermal-Mechanical Coupling Analysis of Lithium-Ion Batteries under Fast Charging SCIE
期刊论文 | 2024 , 2024 | INTERNATIONAL JOURNAL OF ENERGY RESEARCH
Abstract&Keyword Cite Version(2)

Abstract :

Thermal runaway and volume expansion caused by temperature rise under fast charging of lithium-ion batteries (LIBs) are the major reasons of battery explosion and cycle performance degradation. In this work, considering the radiation heat transfer on the battery surface, an electrochemical-thermal-mechanical coupling model of cylindrical LIBs under fast charging (state of charge (SOC) <= 80%) is developed in order to investigate the distributions of the temperature and stress. Then, choosing 18650 LIBs as the object, the charge efficiency, temperature, and stress distributions are compared between fast charging and galvanostatic operation under SOC <= 80%, respectively. Finally, the influences of the thickness, particle radius, the maximum lithium-ion concentration of the cathode, and initial electrolyte concentration on the temperature, radial stress, and hoop stress of LIB during charge are explored, respectively. Numerical results show that fast charging improves 20.8% of the charge efficiency. Increasing the cathodic thickness and decreasing the cathodic maximum lithium-ion concentration or initial electrolyte concentration can reduce the temperature of LIB during the charge. The results of this work will provide some reference value for the design of LIBs under fast charging.

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 Suo, Yaohong , Jia, Qiongnan , Lin, Mingju et al. Electrochemical-Thermal-Mechanical Coupling Analysis of Lithium-Ion Batteries under Fast Charging [J]. | INTERNATIONAL JOURNAL OF ENERGY RESEARCH , 2024 , 2024 .
MLA Suo, Yaohong et al. "Electrochemical-Thermal-Mechanical Coupling Analysis of Lithium-Ion Batteries under Fast Charging" . | INTERNATIONAL JOURNAL OF ENERGY RESEARCH 2024 (2024) .
APA Suo, Yaohong , Jia, Qiongnan , Lin, Mingju , Chen, Zhongyang . Electrochemical-Thermal-Mechanical Coupling Analysis of Lithium-Ion Batteries under Fast Charging . | INTERNATIONAL JOURNAL OF ENERGY RESEARCH , 2024 , 2024 .
Export to NoteExpress RIS BibTex

Version :

Electrochemical-Thermal-Mechanical Coupling Analysis of Lithium-Ion Batteries under Fast Charging Scopus
期刊论文 | 2024 , 2024 | International Journal of Energy Research
Electrochemical-Thermal-Mechanical Coupling Analysis of Lithium-Ion Batteries under Fast Charging EI
期刊论文 | 2024 , 2024 | International Journal of Energy Research
Influence of PCM configuration and optimization of PCM proportion on the thermal management of a prismatic battery with a combined PCM and air cooling structure SCIE
期刊论文 | 2024 , 80 | JOURNAL OF ENERGY STORAGE
WoS CC Cited Count: 23
Abstract&Keyword Cite Version(2)

Abstract :

Different configurations and proportion of phase change material (PCM) have a vital impact on the thermal performance of the battery thermal management system (BTMS). In this work, the thermal performance of the battery pack is investigated by a combined PCM and air cooling technique. Firstly, four cases of PCM configuration are proposed to investigate the heat dissipation performance. Then PCM proportion is optimized to obtain better temperature uniformity, smaller energy loss and smaller amount of PCM based on Case 4. Finally, subjected to the installation space constraint of battery box (smaller volume), Case 5 is designed to diminish the volume of battery box and the corresponding thermal performance is discussed. The results show that thermal performance with PCM is superior than that without PCM; Case 4 not only enhances the thermal performance but also reduces the amount of PCM; The optimized PCM proportion is only 64 %; Compared with all PCM, the optimized Delta T, Delta P and PCM volume respectively reduce 11.91 % (0.83 K), 11.61 % (4.18 Pa) and 43.06 % (215,544 mm3); Case 5 not only shows more better thermal performance than Case 4 but also reduces 102,200 mm3 (3.48 %) volume of the battery box. The proposed strategy is effective for improving thermal performance of BTMS and saving the amount of PCM.

Keyword :

Combined PCM and air-cooling structure Combined PCM and air-cooling structure Optimization Optimization PCM configuration PCM configuration PCM proportion PCM proportion Thermal management Thermal management

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 Suo, Yaohong , Tang, Chengbo , Jia, Qiongnan et al. Influence of PCM configuration and optimization of PCM proportion on the thermal management of a prismatic battery with a combined PCM and air cooling structure [J]. | JOURNAL OF ENERGY STORAGE , 2024 , 80 .
MLA Suo, Yaohong et al. "Influence of PCM configuration and optimization of PCM proportion on the thermal management of a prismatic battery with a combined PCM and air cooling structure" . | JOURNAL OF ENERGY STORAGE 80 (2024) .
APA Suo, Yaohong , Tang, Chengbo , Jia, Qiongnan , Zhao, Wenrui . Influence of PCM configuration and optimization of PCM proportion on the thermal management of a prismatic battery with a combined PCM and air cooling structure . | JOURNAL OF ENERGY STORAGE , 2024 , 80 .
Export to NoteExpress RIS BibTex

Version :

Influence of PCM configuration and optimization of PCM proportion on the thermal management of a prismatic battery with a combined PCM and air cooling structure EI
期刊论文 | 2024 , 80 | Journal of Energy Storage
Influence of PCM configuration and optimization of PCM proportion on the thermal management of a prismatic battery with a combined PCM and air cooling structure Scopus
期刊论文 | 2024 , 80 | Journal of Energy Storage
Deep learning CS-ResNet-101 model for diabetic retinopathy classification SCIE
期刊论文 | 2024 , 97 | BIOMEDICAL SIGNAL PROCESSING AND CONTROL
Abstract&Keyword Cite Version(2)

Abstract :

Objective: Diabetic retinopathy (DR) is a common complication caused by diabetic and can lead to severe visual impairment or even blindness. With the rise of DR population, clinicians demand to adopt an automated diagnosis for reducing some burden. Automated DR classification may improve efficiency and accuracy, and reduce the burden of clinicians. Methods: A full convolution spatial attention module (FCSAM) and CS-ResNet-101 model are proposed for DR classification. In addition, an image enhancement algorithm is proposed to improve the quality of DR images. Furthermore, the cross-entropy loss function is improved to reduce the overfitting. The EyePACS dataset is utilized as training and testing, and the APTOS 2019 dataset is used as external validation. Results: By comparing evaluation metrics of DR classification among different models, the findings are as follows: (1) Accuracy, specificity, sensitivity and F1 score of the CS-ResNet-101 model with the image enhancement algorithm and the improved loss function reach 98.1%, 99.6%, 98.1% and 98.1%, respectively, and it converges faster than other models. (2) The CS-ResNet-101 model exhibits excellent generalization performance on the external validation. Conclusion: The above experimental results indicate that the proposed model with the image enhancement algorithm and the improved loss function is effective and advanced in terms of DR classification. Advances in knowledge: This work proposes an automated DR classification method based on deep learning and an image enhancement algorithm for DR image.

Keyword :

CS-ResNet-101 CS-ResNet-101 Deep learning (DL) Deep learning (DL) Diabetic retinopathy (DR) Diabetic retinopathy (DR) Image enhancement algorithm Image enhancement algorithm Improved loss function Improved loss function

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 Suo, Yaohong , He, Zhaokun , Liu, Yicun . Deep learning CS-ResNet-101 model for diabetic retinopathy classification [J]. | BIOMEDICAL SIGNAL PROCESSING AND CONTROL , 2024 , 97 .
MLA Suo, Yaohong et al. "Deep learning CS-ResNet-101 model for diabetic retinopathy classification" . | BIOMEDICAL SIGNAL PROCESSING AND CONTROL 97 (2024) .
APA Suo, Yaohong , He, Zhaokun , Liu, Yicun . Deep learning CS-ResNet-101 model for diabetic retinopathy classification . | BIOMEDICAL SIGNAL PROCESSING AND CONTROL , 2024 , 97 .
Export to NoteExpress RIS BibTex

Version :

Deep learning CS-ResNet-101 model for diabetic retinopathy classification Scopus
期刊论文 | 2024 , 97 | Biomedical Signal Processing and Control
Deep learning CS-ResNet-101 model for diabetic retinopathy classification EI
期刊论文 | 2024 , 97 | Biomedical Signal Processing and Control
Analysis of Flexoelectric Hollow Cylinder with Thermopolarization Effect SCIE
期刊论文 | 2024 , 59 (5) , 3024-3037 | MECHANICS OF SOLIDS
Abstract&Keyword Cite

Abstract :

Classic thermoelectric coupling effects, such as the Seebeck effect, Peltier effect, and Thomson effect, highlight the significant impact of temperature on the electrical properties of materials. In contrast to these traditional effects, recent studies have identified the emergence of thermopolarization effects, where temperature gradients induce polarization changes in materials, leading to heat flow. Moreover, temperature gradients can also result in strain gradients within the material, which, unlike the piezoelectric effect, can induce polarization, giving rise to the flexoelectric effect. Despite the growing interest in thermopolarization phenomena, there remains a lack of thorough qualitative and quantitative analysis. In this study, we present a thermo-electro-elastic coupling model for an isotropic hollow cylinder incorporating thermopolarization and flexoelectric effects. This model necessitates modifications to the heat conduction equation, constitutive equation, and governing equation. Through numerical simulations, the impact of thermopolarization coefficient and flexoelectric coefficient on radial displacement, temperature, potential, and electrical displacement is investigated. The results show that the steady-state radial displacement and temperature initially increase and then decrease with variations in the thermal polarization coefficient. Moreover, an increase in the thermal polarization coefficient speeds up the thermo-electro-elastic coupling process towards a steady state. Additionally, mutual interactions between flexoelectric and thermal polarization effects are observed. This comprehensive model provides valuable insights for the design and optimization of microelectronic devices.

Keyword :

flexoelectric effect flexoelectric effect temperature gradient temperature gradient thermo-electro-elastic coupling thermo-electro-elastic coupling thermopolarization effect thermopolarization effect

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 Yu, Pengfei , Yang, Dianhan , Peng, Liming et al. Analysis of Flexoelectric Hollow Cylinder with Thermopolarization Effect [J]. | MECHANICS OF SOLIDS , 2024 , 59 (5) : 3024-3037 .
MLA Yu, Pengfei et al. "Analysis of Flexoelectric Hollow Cylinder with Thermopolarization Effect" . | MECHANICS OF SOLIDS 59 . 5 (2024) : 3024-3037 .
APA Yu, Pengfei , Yang, Dianhan , Peng, Liming , Suo, Yaohong , Wu, Yihan . Analysis of Flexoelectric Hollow Cylinder with Thermopolarization Effect . | MECHANICS OF SOLIDS , 2024 , 59 (5) , 3024-3037 .
Export to NoteExpress RIS BibTex

Version :

COMSOL中挠曲电圆筒的力电耦合行为分析
期刊论文 | 2024 , 52 (4) , 430-436 | 福州大学学报(自然科学版)
Abstract&Keyword Cite Version(1)

Abstract :

针对目前商业有限元软件中缺少挠曲电模块且有限元自主编程数值模拟挠曲电问题的复杂性问题,提出在COMSOL软件中的偏微分方程模块(PDE模块),对考虑挠曲电效应的力电耦合问题直接进行数值模拟的方法.首先,通过数值计算固定边界位移的挠曲电圆筒,验证有限元数值计算方法的正确性.接着,研究挠曲电系数和不同材料梯度指数对圆筒力电耦合的影响.数值结果表明:在微米尺度下,增大挠曲电系数对径向位移的影响很小,但是对圆筒内部的电势和电位移分布影响很大.增大材料梯度指数对挠曲电圆筒内部力电耦合影响非常明显,圆筒内部径向位移相对边界处变化范围逐渐减小,圆筒内部电势呈现负值逐渐减小后转为正数的趋势,而圆筒内部电位移值负值逐渐增大.本工作可以为挠曲电效应数值计算及挠曲电结构设计提供帮助.

Keyword :

COMSOL多物理场软件 COMSOL多物理场软件 力电耦合 力电耦合 挠曲电效应 挠曲电效应 有限元分析 有限元分析

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 吁鹏飞 , 孙文超 , 彭黎明 et al. COMSOL中挠曲电圆筒的力电耦合行为分析 [J]. | 福州大学学报(自然科学版) , 2024 , 52 (4) : 430-436 .
MLA 吁鹏飞 et al. "COMSOL中挠曲电圆筒的力电耦合行为分析" . | 福州大学学报(自然科学版) 52 . 4 (2024) : 430-436 .
APA 吁鹏飞 , 孙文超 , 彭黎明 , 锁要红 . COMSOL中挠曲电圆筒的力电耦合行为分析 . | 福州大学学报(自然科学版) , 2024 , 52 (4) , 430-436 .
Export to NoteExpress RIS BibTex

Version :

COMSOL中挠曲电圆筒的力电耦合行为分析 PKU
期刊论文 | 2024 , 52 (04) , 430-436 | 福州大学学报(自然科学版)
Comparative assessment and optimization among several plenum shapes and positions for the forced air-cooled battery thermal management system SCIE
期刊论文 | 2024 , 99 | JOURNAL OF ENERGY STORAGE
WoS CC Cited Count: 12
Abstract&Keyword Cite Version(2)

Abstract :

Plenum shape and position play a significant impact on the heat dissipation performance of battery pack with air-cooled structure. However, the existed plenum shape and position are simple. In this work, four different plenum shapes (slanted, convex, concave and stepped) of the battery thermal management system (BTMS) are designed. Then the influences of plenum shapes and positions (at the inlet, outlet, and inlet & outlet) on the heat dissipation performance of the battery are investigated, respectively. Subsequently, a single factor analysis is performed to obtain the range of the design parameters (H-in, H-out, R-in and R-out) in Design 6. Finally, a multi-objective optimization of Design 6 is carried out to further improve the thermal performance of BTMS. Numerical results demonstrate that: 1) For the significant improvement of the cooling ability, convex plenum is at the inlet & outlet whereas other shape ones are all at the inlet. 2) No matter where it is at the inlet, outlet, or inlet & outlet, the convex plenum achieves the excellent cooling effect in Z- and U-type air-cooled structures. 3) Design 6 (convex plenum at the inlet & outlet) exhibits the best cooling ability among all plenum shapes and positions. 4) The design parameters of the optimized Design 6 are H-in = 17.9 mm, H-out = 19 mm, R-in = 2100 mm and R-out = 2000 mm, and the maximum temperature and temperature difference respectively achieve a 35.06 % (18.921 K) and 76.98 % (19.923 K) reduction under such optimized design parameter settings in comparison with those of the benchmark (Design 9).

Keyword :

Air-cooled structure Air-cooled structure Convex Convex Inlet & outlet Inlet & outlet Optimization Optimization Plenum Plenum

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 Suo, Yaohong , Tang, Chengbo , Han, Enhao et al. Comparative assessment and optimization among several plenum shapes and positions for the forced air-cooled battery thermal management system [J]. | JOURNAL OF ENERGY STORAGE , 2024 , 99 .
MLA Suo, Yaohong et al. "Comparative assessment and optimization among several plenum shapes and positions for the forced air-cooled battery thermal management system" . | JOURNAL OF ENERGY STORAGE 99 (2024) .
APA Suo, Yaohong , Tang, Chengbo , Han, Enhao , Chen, Zhongyang . Comparative assessment and optimization among several plenum shapes and positions for the forced air-cooled battery thermal management system . | JOURNAL OF ENERGY STORAGE , 2024 , 99 .
Export to NoteExpress RIS BibTex

Version :

Comparative assessment and optimization among several plenum shapes and positions for the forced air-cooled battery thermal management system Scopus
期刊论文 | 2024 , 99 | Journal of Energy Storage
Comparative assessment and optimization among several plenum shapes and positions for the forced air-cooled battery thermal management system EI
期刊论文 | 2024 , 99 | Journal of Energy Storage
Optimization design of the forced air-cooled battery thermal management system with a stepped divergence plenum SCIE
期刊论文 | 2023 , 73 | JOURNAL OF ENERGY STORAGE
WoS CC Cited Count: 11
Abstract&Keyword Cite Version(2)

Abstract :

In order to improve heat dissipation performance of battery pack with air-cooled structure, a novel stepped divergence plenum in Z-type air-cooled structure is proposed in a prismatic battery pack. Then the accuracy and effectiveness of computational fluid dynamics (CFD) model are verified by comparison with experimental results. Subsequently, the effects of the total height of all steps and the height of every step on the maximum temperature, temperature difference and temperature standard deviation of battery pack with air-cooled structure are explored, respectively. Finally, the stepped divergence plenum at different inlet airflow velocity is further optimized to achieve better cooling performance. Numerical results indicate that 1) For the larger total height of the steps, the stepped divergence plenum is suitable for Z-type air-cooled structure, and the stepped divergence plenum is better than the slanted one in the aspect of cooling efficiency while the latter is superior to the former for the smaller total height of the steps 2) Compared with the slanted divergence plenum, a stepped divergence plenum improves the heat dissipation performance of the battery for Z-type air-cooled structure. 3) The height of every step and inlet airflow velocity plays an important role in the cooling performance of the battery. The optimization results are h = 0.125 (i.e, Hopt = [1.39, 2.51, 2.51, 2.02, 2.02, 1.89, 1.76, 1.39, 1.51]) and 3 m/s, and the corresponding maximum temperature, temperature difference and temperature standard deviation of the battery pack are respectively reduced about 34.65 %, 77.51 % and 99.04 % in comparison with those for Z-type model. The optimization scheme proposed in this work provides a design guideline to improve the cooling performance of the air-cooled structure.

Keyword :

Air-cooled structure Air-cooled structure Optimization Optimization Slanted divergence plenum Slanted divergence plenum Stepped divergence plenum Stepped divergence plenum Thermal management Thermal management

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 Suo, Yaohong , Tang, Chengbo , Yang, Huai . Optimization design of the forced air-cooled battery thermal management system with a stepped divergence plenum [J]. | JOURNAL OF ENERGY STORAGE , 2023 , 73 .
MLA Suo, Yaohong et al. "Optimization design of the forced air-cooled battery thermal management system with a stepped divergence plenum" . | JOURNAL OF ENERGY STORAGE 73 (2023) .
APA Suo, Yaohong , Tang, Chengbo , Yang, Huai . Optimization design of the forced air-cooled battery thermal management system with a stepped divergence plenum . | JOURNAL OF ENERGY STORAGE , 2023 , 73 .
Export to NoteExpress RIS BibTex

Version :

Optimization design of the forced air-cooled battery thermal management system with a stepped divergence plenum EI
期刊论文 | 2023 , 73 | Journal of Energy Storage
Optimization design of the forced air-cooled battery thermal management system with a stepped divergence plenum Scopus
期刊论文 | 2023 , 73 | Journal of Energy Storage
A Fully Coupled Thermomechanical Analysis of Lithium-Ion Batteries with Total Heat Generation Rate SCIE
期刊论文 | 2023 , 149 (6) | JOURNAL OF ENERGY ENGINEERING
Abstract&Keyword Cite Version(2)

Abstract :

The performance of Lithium-ion batteries (LIBs) is seriously affected by temperature rise and mechanical degradation during the charge or discharge. In this work, a fully coupled thermomechanical model with the total heat generation rate is developed to analyze the mechanism of the temperature rise and stress distribution. Then numerical simulations are performed to show the evolution of temperature and stress for 18650 LIBs. The comparisons of the surface temperature evolution between the present model and experimental results, and the temperature variation with radius between the present model and the pure thermal model are made, respectively. Finally, the influences of some design parameters upon the Li-ions concentration and the stress are discussed. The numerical results show that the present model is more validated against the pure thermal model, and the temperature and stress will be reduced if the positive electrode particle radius, the volume fraction of the positive active material and the initial electrolyte salt concentration are decreased, or the positive electrode thickness is increased which will provide some guides for the design of LIBs.

Keyword :

Hoop stress Hoop stress Radial stress Radial stress Temperature Temperature Thermomechanical coupling Thermomechanical coupling Total heat generation rate Total heat generation rate

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 Suo, Yaohong , Lai, Guanghui , He, Zhaokun . A Fully Coupled Thermomechanical Analysis of Lithium-Ion Batteries with Total Heat Generation Rate [J]. | JOURNAL OF ENERGY ENGINEERING , 2023 , 149 (6) .
MLA Suo, Yaohong et al. "A Fully Coupled Thermomechanical Analysis of Lithium-Ion Batteries with Total Heat Generation Rate" . | JOURNAL OF ENERGY ENGINEERING 149 . 6 (2023) .
APA Suo, Yaohong , Lai, Guanghui , He, Zhaokun . A Fully Coupled Thermomechanical Analysis of Lithium-Ion Batteries with Total Heat Generation Rate . | JOURNAL OF ENERGY ENGINEERING , 2023 , 149 (6) .
Export to NoteExpress RIS BibTex

Version :

A Fully Coupled Thermomechanical Analysis of Lithium-Ion Batteries with Total Heat Generation Rate Scopus
期刊论文 | 2023 , 149 (6) | Journal of Energy Engineering
A Fully Coupled Thermomechanical Analysis of Lithium-Ion Batteries with Total Heat Generation Rate EI
期刊论文 | 2023 , 149 (6) | Journal of Energy Engineering
一种可旋转的多自由度货物搬运机构 incoPat
专利 | 2023-05-31 00:00:00 | CN202321362433.2
Abstract&Keyword Cite

Abstract :

本实用新型涉及一种可旋转的多自由度货物搬运机构,包括搬运台车,所述搬运台车上设置有与其转动连接的挡板,所述挡板侧端竖向滑动连接有滑动板,所述滑动板外侧沿其长度方向滑动连接有滑块,所述滑块上经两块相互铰接的肋板连接有L型的承载板,两块肋板远离相互铰接端分别与滑块、承载板铰接,所述滑块上设置有用以驱动承载板移动的第一液压缸,该第一液压缸输出端斜向下延伸与承载板连接,所述滑块上固设有第一电机,第一电机顶端连接有齿轮并经齿轮与固设在滑动板上的齿条啮合以驱动滑块滑动,所述滑动板经丝杆驱动与挡板滑动连接,该可旋转的多自由度货物搬运机构结构简单,便捷高效。

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 锁要红 , 赖光辉 . 一种可旋转的多自由度货物搬运机构 : CN202321362433.2[P]. | 2023-05-31 00:00:00 .
MLA 锁要红 et al. "一种可旋转的多自由度货物搬运机构" : CN202321362433.2. | 2023-05-31 00:00:00 .
APA 锁要红 , 赖光辉 . 一种可旋转的多自由度货物搬运机构 : CN202321362433.2. | 2023-05-31 00:00:00 .
Export to NoteExpress RIS BibTex

Version :

10| 20| 50 per page
< Page ,Total 5 >

Export

Results:

Selected

to

Format:
Online/Total:1154/14091380
Address:FZU Library(No.2 Xuyuan Road, Fuzhou, Fujian, PRC Post Code:350116) Contact Us:0591-22865326
Copyright:FZU Library Technical Support:Beijing Aegean Software Co., Ltd. 闽ICP备05005463号-1