Query：
学者姓名：罗耀发
Refining：
Year
Type
Indexed by
Source
Complex
Former Name
Co-
Language
Clean All
Abstract ：
LED curing technology makes up for some drawbacks of UV mercury lamps with its merits of no ozone emission and low energy consumption, and gradually replaces traditional UV mercury lamps in numerous fields. Nevertheless, a solitary LED curing coating struggles to fulfill the requirements in terms of curing depth, curing chroma, and comprehensive performance. Based on these, four types of polyurethane acrylate (PUA) coatings were fabricated through two-step synthesis and LED/moisture dual curing technology using cycloaliphatic isocyanate (IPDI), aliphatic isocyanate (HDI), monofunctional acrylate (HEMA), and trifunctional acrylate (PETA) as the primary raw materials. The dual curing system integrates the advantages of LED curing and moisture curing, and mitigates the shortcomings of incomplete curing and poor comprehensive performance of single LED. The experimental results show that these four dual-curing coatings show a certain degree of optimization in comprehensive properties such as curing properties, thermal properties, mechanical properties, and coating properties. In particular, the dual-curing coating prepared with HDI as the hard segment and PETA as the endcapping agent has a surface drying time of only 5 s. After dual curing, the gel content, water contact angle, tensile strength, shear strength, hardness, and adhesive force of the sample can respectively reach 97.8 %, 112.4 degrees, 17.26 MPa, 3.7 MPa, 58.5 Shore D, and 5 B. Additionally, the coating also exhibited outstanding solvent resistance, with the absorption rates of 0.35 %, 8.42 %, 1.35 %, and 1.16 % respectively after 48 h immersion in water, ethanol, 10 wt% NaOH, and 10 wt% HCl solutions. It is also notable that the curing depth of the dual-cured coating can reach 8.96 mm, which is significantly higher than the 3.76 mm of the single light curing, and the colored curing is complete. Four kinds of coatings can be selected and customized in accordance with diverse application requirements, which is of great significance for the further development of environmental protection coatings and holds substantial practical value in industrial production.
Keyword ：
Comprehensive properties Comprehensive properties Isocyanate group Isocyanate group LED/moisture dual-curing system LED/moisture dual-curing system Polyurethane acrylate Polyurethane acrylate
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Luo, Yaofa , Liu, Guang , Xu, Pingfan et al. Structural design and preparation of LED/moisture dual-cured polyurethane acrylate coatings with comprehensive properties [J]. | PROGRESS IN ORGANIC COATINGS , 2025 , 200 . |
| MLA | Luo, Yaofa et al. "Structural design and preparation of LED/moisture dual-cured polyurethane acrylate coatings with comprehensive properties" . | PROGRESS IN ORGANIC COATINGS 200 (2025) . |
| APA | Luo, Yaofa , Liu, Guang , Xu, Pingfan , Ding, Ao , Zhang, Peikun , Zhang, Pengfei et al. Structural design and preparation of LED/moisture dual-cured polyurethane acrylate coatings with comprehensive properties . | PROGRESS IN ORGANIC COATINGS , 2025 , 200 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Three-dimensional (3D) thermally conductive boron nitride (BN)/polymer composites show significant potential in the field of thermal management. This review surveys current advances and discusses the thermal conductivity mechanisms of BN/polymer composites and the critical factors influencing their performance. A thorough introduction to the construction methods of 3D thermally conductive BN/polymer composites is provided, along with an objective discussion of their advantages and disadvantages. Notably, this review specifically highlights the effects of 3D thermally conductive networks on phonon transmission, interfacial thermal resistance, and thermal conductivity, as well as their interactions, and points out recent innovative trends in constructing 3D thermal composites by integrating BN with other dimensional fillers (0D, 1D, and 2D fillers). These approaches demonstrate promising strategies for optimizing thermal management by leveraging the unique advantages of each dimensional filler. The review concludes with a summary and outlook on the development of 3D thermally conductive BN/polymer composites. This aims to provide theoretical analysis, advance practical applications, and enhance next-generation thermal management systems.
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Liu, Guang , Xu, Pingfan , Luo, Zhongzhen et al. Dimensional synergy in 3D thermally conductive boron nitride/polymer composites [J]. | APPLIED PHYSICS REVIEWS , 2025 , 12 (2) . |
| MLA | Liu, Guang et al. "Dimensional synergy in 3D thermally conductive boron nitride/polymer composites" . | APPLIED PHYSICS REVIEWS 12 . 2 (2025) . |
| APA | Liu, Guang , Xu, Pingfan , Luo, Zhongzhen , Zhang, Li , Luo, Yaofa , Zhang, Peikun et al. Dimensional synergy in 3D thermally conductive boron nitride/polymer composites . | APPLIED PHYSICS REVIEWS , 2025 , 12 (2) . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Due to the fact that single UV-cured coatings frequently fail to fulfill the requirements in terms of depth and chroma, and do not reach the ideal state in terms of comprehensive performance. In order to solve these painpoints more effectively, the sulfhydryl-modified castor oil (COME) was successfully synthesized by introducing beta-mercaptoethanol onto the plant-based material castor oil (CO) through the thiol-ene clink reaction. Subsequently, the synthesized polyurethane acrylate prepolymer (COPUA), monomer, photoinitiator and thermocuring agent were used as A component, and COME was used as B component. The two were mixed evenly according to a certain proportion, and the modified castor oil based polyurethane acrylate (COMEPUA) coatings were fabricated by UV/thermal dual-curing technology. Based on a series of performance test outcomes, the coating demonstrates excellent comprehensive properties, encompassing mechanical properties (where the shear strength, tensile strength, elongation at break, and hardness can respectively reach 5.26 MPa, 9.92 MPa, 132.55 %, and 47.77 Shore D), coating properties (where the absorption rates after 72 h immersion in water, ethanol, 10 wt% HCl, and 10 wt% NaOH solvents are respectively 0.66, 17.98, 1.89, and 0.71 %, and the volume resistivity and breakdown voltage are respectively 1.74x1016 Omega & sdot;cm and 10 KV) and curing properties (where the curing depth can reach 9.82 mm, which is significantly higher than 3.51 mm of single UV curing, and the colored curing is complete). It can exert protective functions such as anti-corrosion, anti-fouling, and insulation on circuit boards, electronic packaging, and device surfaces, and holds great potential in the application of coating materials.
Keyword ：
Comprehensive performance Comprehensive performance Modified castor oil Modified castor oil Polyurethane acrylate Polyurethane acrylate Thiol-ene clink reaction Thiol-ene clink reaction UV/thermal dual-curing system UV/thermal dual-curing system
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Luo, Yaofa , Liu, Guang , Zhang, Pengfei et al. Modified castor oil-based UV/thermal dual-curing polyurethane acrylate coatings with outstanding comprehensive properties [J]. | MATERIALS TODAY COMMUNICATIONS , 2024 , 41 . |
| MLA | Luo, Yaofa et al. "Modified castor oil-based UV/thermal dual-curing polyurethane acrylate coatings with outstanding comprehensive properties" . | MATERIALS TODAY COMMUNICATIONS 41 (2024) . |
| APA | Luo, Yaofa , Liu, Guang , Zhang, Pengfei , Zhou, Bing , Zhang, Peikun , Xu, Pingfan et al. Modified castor oil-based UV/thermal dual-curing polyurethane acrylate coatings with outstanding comprehensive properties . | MATERIALS TODAY COMMUNICATIONS , 2024 , 41 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
P-N-B organic flame retardant was synthesized using 4-formylphenylboronic acid, 4-aminophenylthiophenol, 9,10-dihydro-9-oxa-10-phos-phaphenanthrene-10-oxide (DOPO), and then introduced into the hydroxyl-terminated polybutadiene acrylonitrile (HTBN) molecular chain to successfully prepare a macromolecular flame retardant, which was used to prepare flame retardant waterborne polyurethane. The mechanical properties, thermal properties, and flame retardancy of waterborne polyurethane (FR-WPU) were studied using thermogravimetic analysis (TGA), limiting oxygen index (LOI), scanning electron microscope (SEM), cone calorimeter, and universal testing machine, respectively, and the flame retardant mechanism of macromolecular flame retardants was explored. An LOI value of 29.76% and a UL-94 V-0 rating could be realized when the APFBH conjugation is 7.5 wt%, showing a significant improvement of melt dripping behavior and flame retardancy. It indicated that the fire resistance of FR-WPU remarkably improved and displayed both gas and condensed phase mechanism. As the content of APBDH increased, the tensile strength and the elongation at break of FR-WPU increased firstly and then decreased.
Keyword ：
boron boron flame retardancy flame retardancy functionalization of polymers functionalization of polymers waterborne polyurethane waterborne polyurethane
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Luo, Yaofa , Jiang, Ronghua , Xu, Yihao et al. Preparation and performance of waterborne polyurethane coatings based on the intumescent flame retardant of boron, phosphorus, and nitrogen [J]. | JOURNAL OF APPLIED POLYMER SCIENCE , 2024 , 142 (7) . |
| MLA | Luo, Yaofa et al. "Preparation and performance of waterborne polyurethane coatings based on the intumescent flame retardant of boron, phosphorus, and nitrogen" . | JOURNAL OF APPLIED POLYMER SCIENCE 142 . 7 (2024) . |
| APA | Luo, Yaofa , Jiang, Ronghua , Xu, Yihao , Wang, Hui , Qiu, Zeping , Huang, Jin et al. Preparation and performance of waterborne polyurethane coatings based on the intumescent flame retardant of boron, phosphorus, and nitrogen . | JOURNAL OF APPLIED POLYMER SCIENCE , 2024 , 142 (7) . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
采用硅烷偶联剂为桥梁将聚六亚甲基双胍盐酸盐(PHMB)接枝在纳米二氧化钛(TiO2)表面制备了 TiO2-PHMB抗菌剂,再将其与聚己二酸-对苯二甲酸丁二酯/聚乳酸(PBAT/PLA)熔融共混造粒并吹制得到PBAT/PLA/TiO2-PHMB生物降解抗菌保鲜膜,研究了不同含量抗菌剂对保鲜膜形态结构、力学性能、热稳定性能、水蒸气透过率及抗菌性能的影响.结果表明,当TiO2-PHMB抗菌剂添加量为1％时,PBAT/PLA/TiO2-PHMB生物降解抗菌保鲜膜的纵横向拉伸强度分别提升了 11.7％和13.7％,断裂伸长率维持在658％和536％,水蒸气透过率降低了 12.50％,对大肠杆菌(E.coli)和金黄色葡萄球菌(S.aureus)的抑菌率分别达到62.70％和84.54％,对新鲜樱桃展现了良好的保鲜效果.
Keyword ：
保鲜膜 保鲜膜 抗菌 抗菌 生物降解 生物降解 纳米二氧化钛 纳米二氧化钛 聚六亚甲基双胍盐酸盐 聚六亚甲基双胍盐酸盐
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | 孙文涛 , 龚佳荣 , 刘新宇 et al. 聚胍接枝二氧化钛抗菌剂改性聚己二酸-对苯二甲酸丁二酯/聚乳酸生物降解保鲜膜的制备与性能 [J]. | 高分子材料科学与工程 , 2024 , 40 (11) : 29-39 . |
| MLA | 孙文涛 et al. "聚胍接枝二氧化钛抗菌剂改性聚己二酸-对苯二甲酸丁二酯/聚乳酸生物降解保鲜膜的制备与性能" . | 高分子材料科学与工程 40 . 11 (2024) : 29-39 . |
| APA | 孙文涛 , 龚佳荣 , 刘新宇 , 许平凡 , 刘源森 , 罗耀发 et al. 聚胍接枝二氧化钛抗菌剂改性聚己二酸-对苯二甲酸丁二酯/聚乳酸生物降解保鲜膜的制备与性能 . | 高分子材料科学与工程 , 2024 , 40 (11) , 29-39 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Polymer matrix composites with excellent thermal management performance have emerged as remarkable materials in the realms of microelectronic devices and wireless communication technologies. However, achieving high thermal conductivity in most composites often requires a high filling load, which will compromise other desirable properties. Herein, utilizing physical foaming and vacuum infiltration methods, we introduce a 3D honeycomb composite consisting of surface-hydroxylated hexagonal boron nitride (OH-BN) and epoxy. The 3D OH-BN honeycomb foam in the composite features a lightweight design (0.33 g/cm3), high strength (7178 times its own weight) and prominent heat transfer performance. Significantly, these composites achieve notable thermal properties, including high through-plane thermal conductivity (2.073 W m- 1 K-1) and relatively low thermal resistance (0.995 degrees C/W) at a reduced filling load (17.2 vol%). In comparison with pure epoxy, the through-plane thermal conductivity is enhanced by an impressive 894 %, while the thermal resistance is reduced to 1/9.4 of that observed in pure epoxy. Besides, the 3D honeycomb composites combine outstanding mechanical performance, low dielectric properties and excellent insulation, underscoring their potential in the field of thermal management applications in microelectronic devices, wireless communication systems and integrated circuits.
Keyword ：
3D thermal conduction networks 3D thermal conduction networks Boron nitride Boron nitride Epoxy composites Epoxy composites Thermal management Thermal management Thermal resistance Thermal resistance
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Liu, Guang , Ding, Ao , Xu, Pingfan et al. Thermal conductivity of epoxy composites containing 3D honeycomb boron nitride filler [J]. | CHEMICAL ENGINEERING JOURNAL , 2024 , 489 . |
| MLA | Liu, Guang et al. "Thermal conductivity of epoxy composites containing 3D honeycomb boron nitride filler" . | CHEMICAL ENGINEERING JOURNAL 489 (2024) . |
| APA | Liu, Guang , Ding, Ao , Xu, Pingfan , Zhu, Minmin , Zhang, Haizhong , Zheng, Yuying et al. Thermal conductivity of epoxy composites containing 3D honeycomb boron nitride filler . | CHEMICAL ENGINEERING JOURNAL , 2024 , 489 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Photocatalysis is a promising technology for removing micropollutants in water. However, developing efficient and stable catalysts remains a challenge. In this work, a novel step-scheme (S-scheme) heterojunction of WO3/SnIn4S8 (WSI) was constructed through the combined process of in situ precipitation with hydrothermal synthesis to simultaneously realize photocatalytic degradation of bisphenol A(BPA) and reduction of Cr(VI) in contaminated water. Results showed that the WSI S-scheme heterojuction has a synergistic effect for the removal of BPA and Cr(VI). An optimum case of the WSI-12% heterojunction exhibited the highest photocatalytic efficiency in the degradation of BPA under visible light, which is ca. 2.5 and 3.8 times more than the pure WO(3 )and SIS, respectively. The enhanced photocatalytic activity is attributed to the formation of the WSI S-scheme heterojunctions which facilitate the spatial separation of charge carriers and preserve strong photoredox ability. Further, the S-scheme mechanism of enhanced photocatalysis was examined by the radical-trapping experiment and ESR, and superoxide and hydroxyl radicals were determined to be the major reactive oxygen species responsible for BPA degradation and Cr(VI) reduction by WSI. This work provides a novel strategy for tailoring high-performance S-scheme heterojunctions and shows the promising application in purifying wastewater with complex pollutants.
Keyword ：
bisphenol A bisphenol A hexavalent chromium hexavalent chromium photocatalytic degradation photocatalytic degradation WO3/SnIn4S8 heterostructure WO3/SnIn4S8 heterostructure
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Xu, Pingfan , Zhang, Runqiu , Gong, Jiarong et al. S-Scheme WO3/SnIn4S8 Heterojunction for Water Purification: Enhanced Photocatalytic Performance and Mechanism [J]. | CATALYSTS , 2023 , 13 (11) . |
| MLA | Xu, Pingfan et al. "S-Scheme WO3/SnIn4S8 Heterojunction for Water Purification: Enhanced Photocatalytic Performance and Mechanism" . | CATALYSTS 13 . 11 (2023) . |
| APA | Xu, Pingfan , Zhang, Runqiu , Gong, Jiarong , Luo, Yaofa , Zhuang, Yihua , Zhang, Peikun . S-Scheme WO3/SnIn4S8 Heterojunction for Water Purification: Enhanced Photocatalytic Performance and Mechanism . | CATALYSTS , 2023 , 13 (11) . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
本发明属于阻燃材料技术领域，更具体地是涉及一种单宁酸基单组分膨胀型阻燃剂及其制备方法和应用。以天然生物基单宁酸为碳源，磷氮二元醇为酸源，三嗪衍生物为气源，通过一定的配比关系化学接枝得到单宁酸基单组分膨胀型阻燃剂。本发明提供的单宁酸基单组分膨胀型阻燃剂磷氮元素含量高，富含苯环、三嗪环、酚羟基和端羟基等结构，既可以作为添加型阻燃剂也可以作为反应型阻燃剂，与多种有机高分子材料相容性好，在确保材料性能的前提下，对材料加工工艺条件要求低，可应用于多种有机高分子材料的高效阻燃改性。本发明提供的含有单宁酸基单组分膨胀型阻燃剂的阻燃产品种类多样，制造工艺简单，阻燃性能优异，可大范围推广应用。
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | 章培昆 , 毛聪 , 王越岩 et al. 一种单宁酸基单组分膨胀型阻燃剂及其制备方法和应用 : CN202211408762.6[P]. | 2022-11-08 00:00:00 . |
| MLA | 章培昆 et al. "一种单宁酸基单组分膨胀型阻燃剂及其制备方法和应用" : CN202211408762.6. | 2022-11-08 00:00:00 . |
| APA | 章培昆 , 毛聪 , 王越岩 , 罗耀发 , 许平凡 . 一种单宁酸基单组分膨胀型阻燃剂及其制备方法和应用 : CN202211408762.6. | 2022-11-08 00:00:00 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
文章介绍了自主开发的水性微孔型防水透湿膜的防水透湿机理、性能特点以及制备工艺,重点介绍了其在羽绒服面料上的应用优势与特点,最后对其未来发展趋势进行了展望.
Keyword ：
制备工艺 制备工艺 发展趋势 发展趋势 机理 机理 防水透湿 防水透湿
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | 罗耀发 . 水性微孔型防水透湿膜的开发及在羽绒服面料中的应用 [J]. | 纺织导报 , 2023 , (2) : 30-33 . |
| MLA | 罗耀发 . "水性微孔型防水透湿膜的开发及在羽绒服面料中的应用" . | 纺织导报 2 (2023) : 30-33 . |
| APA | 罗耀发 . 水性微孔型防水透湿膜的开发及在羽绒服面料中的应用 . | 纺织导报 , 2023 , (2) , 30-33 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
It is critical to design and synthesize superior metal-free PMS catalysts, particularly to optimize the interaction between non-metallic heteroatoms and biochar, facilitating electron conduction and the generation of reactive oxygen species. Hence, this work presented a feasible synthetic strategy for anchoring phosphorus on in-situ nitrogen-doped biochar via ball milling at room temperature. Mechanical forces triggered the dehydration reaction between phosphoric acid and C-OH bonds, forming C-O-P bonds. In particular, the obtained N and P codoped biochar (NPB) showed excellent catalytic activity. The reaction and removal rate of diclofenac sodium (DS) in the NPB/PMS system were 0.3974 min(-1) and 90.08 % (only 10 min), respectively, significantly higher than those in the in-situ nitrogen-doped biochar/PMS system. The impressive catalytic efficiency was attributed to the coupling effect of high-efficiency adsorption and exceptional electron transfer capabilities. Anchoring P into the carbon structure effectively expedited the electron transfer from adsorbed DS molecules to metastable PMS complexes via the carbon-bridge effect, ultimately leading to DS degradation. The C=O groups, pyridinic N, graphitic N, and defect sites were possible active sites for PMS activation. GC/MS identified the potential degradation paths of DS, but the toxicity of DS and its intermediates was noteworthy. Furthermore, the DS degradation efficiency of the NPB/PMS system was little hampered by pH (2.95-9.07), anions, humic acid, and actual water, suggesting its application potential in real-world wastewater. Overall, this study paves a new way for constructing effective N and P co-doped non-metallic PMS catalysts, which may be expanded to other carbon materials to fulfil the unique demands of various applications.
Keyword ：
Ball milling Ball milling Electron transfer Electron transfer Fish scale Fish scale N and P co-doped biochar N and P co-doped biochar Peroxymonosulfate Peroxymonosulfate
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Xie, Jia , Xu, Pingfan , Liu, Minghua et al. Anchoring phosphorus on in-situ nitrogen-doped biochar by mechanical milling for promoted electron transfer from diclofenac sodium to peroxymonosulfate [J]. | SEPARATION AND PURIFICATION TECHNOLOGY , 2022 , 301 . |
| MLA | Xie, Jia et al. "Anchoring phosphorus on in-situ nitrogen-doped biochar by mechanical milling for promoted electron transfer from diclofenac sodium to peroxymonosulfate" . | SEPARATION AND PURIFICATION TECHNOLOGY 301 (2022) . |
| APA | Xie, Jia , Xu, Pingfan , Liu, Minghua , Liu, Yanling , Zhu, Lang , Yu, Fangxia et al. Anchoring phosphorus on in-situ nitrogen-doped biochar by mechanical milling for promoted electron transfer from diclofenac sodium to peroxymonosulfate . | SEPARATION AND PURIFICATION TECHNOLOGY , 2022 , 301 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Export
| Results： |
Selected to |
| Format： |
