Query：
学者姓名：魏明灯
Refining：
Year
Type
Indexed by
Source
Complex
Co-
Language
Clean All
Abstract ：
Superior quality of perovskite film with perfect crystalline and low defect density is crucial for achieving excellent photovoltaic performance and durability of perovskite solar cells (PSCs), and regulation of growth of perovskite crystal and defects passivation by additive is remain challenge. Herein, two acyl molecules (Succinimide: SCI, and Hydantoin: HDT) were incorporated into perovskite precursor solution as additive. It can be found that the HDT molecule can not only passivate undercoordinated Pb 2+ defects in perovskite films by the -C=O groups with coordination bonds, but also formed hydrogen bonds with I - by -NH- group, which effectively inhibited the formation of iodine vacancy defects and regulated growth rate of perovskite crystals, and the quality of perovskite films was optimized with enlarging grain size and reduced trap -density. Consequently, power conversion efficiency of HDT-based device was enhanced from 19.47 % to 21.00 %, with an enhancement of J SC and V OC . Moreover, the HDT-based device without encapsulation retained 83.7 % of its initial PCE after being aged at 10 - 20 % RH for 60 days. Obviously, such a study could provide a new strategy to optimize quality of perovskite film for boosting performance of PSCs.
Keyword ：
Acyl additive Acyl additive Coordination bond Coordination bond Defects passivation Defects passivation Hydrogen bond Hydrogen bond Perovskite solar cells Perovskite solar cells
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Guo, Minghuang , Chen, Yongsheng , Chen, Shaolin et al. Synchronous effect of coordination and hydrogen bonds boosting the photovoltaic performance of perovskite solar cells [J]. | ELECTROCHIMICA ACTA , 2024 , 492 . |
| MLA | Guo, Minghuang et al. "Synchronous effect of coordination and hydrogen bonds boosting the photovoltaic performance of perovskite solar cells" . | ELECTROCHIMICA ACTA 492 (2024) . |
| APA | Guo, Minghuang , Chen, Yongsheng , Chen, Shaolin , Zuo, Caixin , Li, Yafeng , Chang, Yuan Jay et al. Synchronous effect of coordination and hydrogen bonds boosting the photovoltaic performance of perovskite solar cells . | ELECTROCHIMICA ACTA , 2024 , 492 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Sodium/potassium-ion batteries (SIBs/PIBs) as alternatives complement of Li-ion batteries (LIBs) exhibit cost-effective, appropriate redox potential, and high energy density. Unfortunately, the large volumetric expansion and severe pulverization toward anode materials of SIBs/PIBs during the charge/discharge progress limit their practical implementations. In this work, selenium doped carbon nanofibers integrated with bismuth-antimony alloy nanocrystals (denoted as BiSb-Se/CNFs) have been fabricated as anode materials for SIBs/PIBs. The hierarchical carbon nanofiber frameworks in BiSb-Se/CNFs composite not only provide sufficient space to accommodate Na/K ions, ensuring high structural stability, but also facilitate rapid electron and ion transport, enhancing the redox reaction kinetic. As expected, the BiSb-Se/CNFs electrode demonstrates a superior sodium storage capacity of 370 mAh g(-1) at current densities of 0.5 A g(-1) after 650 cycles, withstanding a long-term cycling of 2000 cycles and showing a remarkable capacity up to 309 mAh g(-1) at 2 A g(-1). Moreover, an impressive potassium storage performance with a superior capacity and outstanding reversible stability can be observed over the BiSb-Se/CNFs electrode. This work elucidates the design of alloy-type electrodes with a high lifespan in both SIBs and PIBs, which provides inspiration for practical multiapplication scenarios for anodes.
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Li, Xinye , Zeng, Lingxing , Lai, Wenbin et al. BiSb Alloy Anchored on Selenium Doped Carbon Nanofibers as Highly Stable Anode Materials for Sodium/Potassium-Ion Batteries [J]. | ENERGY & FUELS , 2024 , 38 (17) : 16966-16975 . |
| MLA | Li, Xinye et al. "BiSb Alloy Anchored on Selenium Doped Carbon Nanofibers as Highly Stable Anode Materials for Sodium/Potassium-Ion Batteries" . | ENERGY & FUELS 38 . 17 (2024) : 16966-16975 . |
| APA | Li, Xinye , Zeng, Lingxing , Lai, Wenbin , Lei, Zewei , Ge, Mingyang , Fang, Chaobin et al. BiSb Alloy Anchored on Selenium Doped Carbon Nanofibers as Highly Stable Anode Materials for Sodium/Potassium-Ion Batteries . | ENERGY & FUELS , 2024 , 38 (17) , 16966-16975 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Transition metal chalcogenides (TMCs) with 3d orbitals have been intensively studied for use as cathodes in magnesium-ion batteries. However, their poor electronic conductivities and sluggish electrochemical kinetics severely restrict their electrochemical performance, preventing wide applicability for these materials. Here, we propose a heterointerface structure of cobalt sulfide (Co3S4/CoS2) hollow nanospheres to enable built-in electric fields generated in heterointerfaces, as verified in density functional theory, finite-element simulations, and ab initio molecular dynamics results. Compared to other TMCs, our cathode exhibited a substantial capacity of 597 mAh g−1 after 120 cycles at 50 mA g−1. When evaluated in a pouch cell, the electrode can sustain 100 deep cycles at 40 mA g−1 with an energy density of 203 Wh kg−1 that displays potential for practical applications. Finally, rational heterostructure engineering of transition-metal-based sulfides provides insights into developing cathodes for high-performance sustainable Mg batteries. © 2024 Elsevier Inc.
Keyword ：
Cathodes Cathodes Cobalt compounds Cobalt compounds Density functional theory Density functional theory Electric fields Electric fields Heterojunctions Heterojunctions Inorganic compounds Inorganic compounds Magnesium Magnesium Metal ions Metal ions Molecular dynamics Molecular dynamics Sulfur compounds Sulfur compounds Transition metals Transition metals
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Wang, Jianbiao , Ghosh, Tanmay , Ju, Zhengyu et al. Heterojunction structure of cobalt sulfide cathodes for high-performance magnesium-ion batteries [J]. | Matter , 2024 , 7 (5) : 1833-1847 . |
| MLA | Wang, Jianbiao et al. "Heterojunction structure of cobalt sulfide cathodes for high-performance magnesium-ion batteries" . | Matter 7 . 5 (2024) : 1833-1847 . |
| APA | Wang, Jianbiao , Ghosh, Tanmay , Ju, Zhengyu , Ng, Man-Fai , Wu, Gang , Yang, Gaoliang et al. Heterojunction structure of cobalt sulfide cathodes for high-performance magnesium-ion batteries . | Matter , 2024 , 7 (5) , 1833-1847 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Spiro-OMeTAD, as a crucial component of hole-transporting layer (HTL), exhibits limited mobility and conductivity, and the lithium bis-trifluoromethanesulfonimide dopant is sensitive to water vapor, which imposes restrictions on the photovoltaic properties of perovskite solar cells (PSCs). Herein, the iron-porphyrin (FePP) is introduced into Spiro-OMeTAD solution as additive, which facilitates the oxidation process of Spiro-OMeTAD, leading to the enhancement of hole mobility and hole extraction and transport. Besides, the surface Pb2+ defects of perovskite film are cured by the presence of carboxylic acids (-COOH) in FePP. As a result, the photovoltaic properties of PSCs with FePP additive have been improved with a power conversion efficiency (PCE) of 21.58%. Moreover, FePP can further anchor Li+ ions in HTL to prevent it from being invaded by water vapor. Dramatically, the degradation of unencapsulated devices with FePP is suppressed significantly, which retains 82.0% of its original PCE under 10-20% relative humidity (RH) after 7100 h and maintains about 79.6% of its original PCE under 50-60% RH after 1000 h. Thus, this study shows that the design and development of multifunctional HTL additives holds great potential for achieving highly efficient and durable PSCs. The iron-porphyrin additive can not only promote the oxidation of Spiro-OMeTAD and improve the extraction and transport of holes of HTL, but also passivate the Pb2+ defects of perovskite film and prevent the Li+ from being invaded by water vapor, which enhance the power conversion efficiency and stability of perovskite solar cells significantly.image (c) 2024 WILEY-VCH GmbH
Keyword ：
additives additives hole-transporting layers hole-transporting layers iron-porphyrin iron-porphyrin preoxidation preoxidation stability stability
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Guo, Minghuang , Liu, Chensi , Wu, Chenchen et al. Multifunctional Iron-Porphyrin Additive for Hole-Transporting Layer Toward Efficient and Stable Perovskite Solar Cells [J]. | SOLAR RRL , 2024 , 8 (8) . |
| MLA | Guo, Minghuang et al. "Multifunctional Iron-Porphyrin Additive for Hole-Transporting Layer Toward Efficient and Stable Perovskite Solar Cells" . | SOLAR RRL 8 . 8 (2024) . |
| APA | Guo, Minghuang , Liu, Chensi , Wu, Chenchen , Zhu, Jingwei , Hu, Ping , Li, Yafeng et al. Multifunctional Iron-Porphyrin Additive for Hole-Transporting Layer Toward Efficient and Stable Perovskite Solar Cells . | SOLAR RRL , 2024 , 8 (8) . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Perovskite solar cells have gradually become the most attractive alternative for next-generation photovoltaic devices due to their excellent photovoltaic conversion efficiencies and low manufacturing costs. Defect engineering is an essential topic for improving the performance of perovskite devices. In this study, we utilize a bifunctional alkylamine sulfonate to modify the perovskite interfaces. The TsO- of sulfonates coordinates with Pb2+, while -NH2 of alkylamine forms hydrogen bonds with iodine, which reduces charge recombination and improves energy level arrangement. The molecular size and the alkylamine's dielectric constant significantly influence the interface modification performance. For the champion device with BATsO treatment, there is an enhancement in both the fill factor and the open-circuit voltage, resulting in a power conversion efficiency (PCE) of 23.53%. After 400 h of working condition, the device maintains roughly 90.40% of its initial efficiency. Therefore, this study postulates that modifying bifunctional alkylamine sulfonates could effectively enhance the PSC's performance.
Keyword ：
Double -functional additive Double -functional additive Passivation defects Passivation defects Perovskite solar cells Perovskite solar cells
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Huang, Shaobiao , Wang, Renjie , Zheng, Qiao et al. Optimal interfacial engineering with different bifunctional alkylamine sulfonates for efficient perovskite solar cells [J]. | SOLAR ENERGY MATERIALS AND SOLAR CELLS , 2024 , 270 . |
| MLA | Huang, Shaobiao et al. "Optimal interfacial engineering with different bifunctional alkylamine sulfonates for efficient perovskite solar cells" . | SOLAR ENERGY MATERIALS AND SOLAR CELLS 270 (2024) . |
| APA | Huang, Shaobiao , Wang, Renjie , Zheng, Qiao , Deng, Hui , Zhang, Caixia , Wang, Weihuang et al. Optimal interfacial engineering with different bifunctional alkylamine sulfonates for efficient perovskite solar cells . | SOLAR ENERGY MATERIALS AND SOLAR CELLS , 2024 , 270 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
The optimization of interfacial properties between the perovskite layer and the electron-transporting layer (ETL) is always a vital approach to reduce the defects for improving the photovoltaic performance of the perovskite solar cells (PSCs). Herein, nanomaterials of tunable photoluminescent nitrogen-doped graphene quantum dots (TP-N-GQDs) were prepared though a facile solid-phase microwave-assisted (SPMA) method in the presence of citric acid by adding urea as a nitrogen precursor. Leveraging the synergistic effect of N-GQDs along with the tunable photoluminescent property at the interface of PSCs proved to be an efficient strategy for enhancing the light-harvesting capability and facilitating the charge transportation simultaneously, which leads to an overall improvement of the PSC performance. Moreover, the electron-rich pyridinic nitrogen within TP-N-GQDs acted as a Lewis base, coordinating with Pb2+ ions in perovskite and forming coordination bonds by sharing electron pairs, thereby decreasing the density of defects at the interface and the nonradiative recombination of the photogenerated carriers. Consequently, through the optimization of the nitrogen doping ratio of TP-N-GQDs, PSCs with areas of 0.09 and 1 cm(2) achieved maximum power conversion efficiencies (PCEs) of 21.98 and 17.12%, respectively. Additionally, TP-N-GQD passivation significantly enhanced the long-term stability of the device. The unencapsulated TP-N-GQD-modified device could sustain about 83% of its initial PCE afterward for 30 days of storage in air (25 +/- 5 degrees C, RH 25 +/- 5%).
Keyword ：
charge transportation charge transportation interfacial modification interfacial modification nitrogen-dopedGQDs nitrogen-dopedGQDs reducing defectdensity reducing defectdensity tunable photoluminescent tunable photoluminescent
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Shen, Deli , Lan, Tongbin , Qiao, Dongxu et al. Tunable Photoluminescent Nitrogen-Doped Graphene Quantum Dots at the Interface for High-Efficiency Perovskite Solar Cells [J]. | ACS APPLIED NANO MATERIALS , 2024 , 7 (2) : 2232-2243 . |
| MLA | Shen, Deli et al. "Tunable Photoluminescent Nitrogen-Doped Graphene Quantum Dots at the Interface for High-Efficiency Perovskite Solar Cells" . | ACS APPLIED NANO MATERIALS 7 . 2 (2024) : 2232-2243 . |
| APA | Shen, Deli , Lan, Tongbin , Qiao, Dongxu , Guo, Minghuang , Zuo, Juan , Gu, Siyong et al. Tunable Photoluminescent Nitrogen-Doped Graphene Quantum Dots at the Interface for High-Efficiency Perovskite Solar Cells . | ACS APPLIED NANO MATERIALS , 2024 , 7 (2) , 2232-2243 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
The migration and volatilization of cations within organic-inorganic hybrid perovskite (OIPs) materials has been identified as a major issue for irreversibly degrading perovskite solar cells (PSCs), severely limiting their performance and impeding progress toward large-scale applications. To mitigate these problems, an adjustable cation immobilization strategy was proposed for the first time, in which a series of fluorobenzenesulfonamide (FBSA) molecules was introduced into perovskite precursor, a strong coordination bond was formed between the sulfonamide group with the octahedral imperfection caused by iodine vacancy, along with a hydrogen bond formed between the cation and F atom. As a result, the A-site cations were tightly immobilized in the octahedral of perovskite crystal lattice and the uncoordinated Pb2+ defects were effectively eliminated. Besides, the immobilization distance of cation was finely optimized by changing the substitution position of F atoms. Based on the cation-immobilized perovskite film, the efficiency of PSCs was significantly increased from 19.88 % to 22.30 %. Moreover, the unencapsulated PSCs exhibited impressive light and thermal stability, retaining 82 % of the initial efficiency after 720 h illumination at 1-sun, and maintaining nearly 80 % of the initial PCE after heating at 85 degrees C for 240 h. Thus, the present study offers a promising approach for advancing the commercialization of stable and high-efficiency perovskite solar cells.
Keyword ：
Cation immobilization Cation immobilization Defects passivation Defects passivation Ion migration Ion migration Light stability Light stability Perovskite solar cells Perovskite solar cells
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Zhu, Jingwei , Xiu, Jieying , Zheng, Jianbin et al. Fine optimized cation immobilization strategy for enhancing stability and efficiency of perovskite solar cells [J]. | CHEMICAL ENGINEERING JOURNAL , 2024 , 487 . |
| MLA | Zhu, Jingwei et al. "Fine optimized cation immobilization strategy for enhancing stability and efficiency of perovskite solar cells" . | CHEMICAL ENGINEERING JOURNAL 487 (2024) . |
| APA | Zhu, Jingwei , Xiu, Jieying , Zheng, Jianbin , Li, Xiaoyang , Luo, Haiyan , Li, Yafeng et al. Fine optimized cation immobilization strategy for enhancing stability and efficiency of perovskite solar cells . | CHEMICAL ENGINEERING JOURNAL , 2024 , 487 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Silicon-based anodes heavily depend on the binder to preserve the unbroken electrode structure. In the present work, natural flaxseed gum (FG) is used as a binder of silicon nanoparticles (SiNPs) anode for the first time. Owing to a large number of polar groups and a rich branched structure, this material not only anchors tightly to the surface of SiNPs through bonding interactions but also formed a hydrogen bonding network structure among molecules. As a result, the FG binder can endow the silicon electrode with stable interfacial adhesion and outstanding mechanical properties. In addition, FG with a high viscosity facilitates the homogeneous dispersion of the electrode components. When FG is used as a binder, the cycling performance of the Si anode is greatly improved. After one hundred cycles at an applied current density of 1 A g-1, the electrode continues to display remarkable electrochemical properties with a significant cyclic capacity (2213 mA h g-1) and initial Coulombic efficiency (ICE) of 89.7%. FG is used as a silicon-based anode binder for lithium-ion batteries for the first time. As FG possesses abundant polar groups and branched chains, it enhances the mechanical properties of the silicon electrode and greatly improves the cycling stability of the silicon electrode. image
Keyword ：
binder binder flaxseed gum flaxseed gum high-branched structure high-branched structure lithium-ion batteries lithium-ion batteries silicon-based anode silicon-based anode
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Zhou, Wenbo , Zhang, Renwei , Yu, Shijie et al. High-Branched Natural Polysaccharide Flaxseed Gum Binder for Silicon-Based Lithium-Ion Batteries with High Capacity [J]. | SMALL , 2024 , 20 (36) . |
| MLA | Zhou, Wenbo et al. "High-Branched Natural Polysaccharide Flaxseed Gum Binder for Silicon-Based Lithium-Ion Batteries with High Capacity" . | SMALL 20 . 36 (2024) . |
| APA | Zhou, Wenbo , Zhang, Renwei , Yu, Shijie , Peng, Zexuan , Zuo, Caixin , Yang, Wenjuan et al. High-Branched Natural Polysaccharide Flaxseed Gum Binder for Silicon-Based Lithium-Ion Batteries with High Capacity . | SMALL , 2024 , 20 (36) . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Sodium/potassium ion batteries (SIBs/PIBs) are attractive energy storage devices that offer greater sustainability and economic efficiency compared to their lithium-ion battery (LIB) counterparts. However, conventional electrode materials with satisfactory cycling stability and rate capacity are still lacking, due to intrinsic low electronic conductivity, sluggish intrinsic ion/electron kinetics and unsatisfactory structural stability. Herein, a well-designed two-step electrospinning/annealing strategy has been employed to fabricate defect-rich WSxSe2-x nanocrystals within selenized polyacrylonitrile fibers (designated as WSSe-Se@PAN). By tuning the Se-doping into the PAN fibers and forming defect-rich WSxSe2-x nanocrystals, the synergistic coupling of S-vacancy regulation can enhance the active sites, expand the interlayer spacing, and accelerate Na+/K+ diffusion kinetics, simultaneously. The WSSe-Se@PAN electrode, serving as the anode, delivers a superior sodium storage performance (467 mA h g(-1) at 2.0 A g(-1) after 700 cycles), and shows a reversible discharge capacity of 299 mA h g(-1) at 0.5 A g(-1) after 60 cycles with 99.8% capacity retention for the sodium ion full batteries. Encouragingly, it displays excellent feasibility in a wide working temperature range between -15 and 50 degrees C for SIBs. Furthermore, it exhibits high-rate capability and robust cycling life (139 mA h g(-1) at 1.0 A g(-1) after 1000 cycles) for PIBs. This work demonstrates that defect engineering of metal chalcogenides by anion doping is a feasible strategy to achieve high-performance anode materials for alkali metal ion batteries.
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Xiao, Fuyu , Zhang, Jingran , Zhou, Weiming et al. Defect-engineered WSxSe2-x nanocrystals anchored on selenized polyacrylonitrile fibers toward high-performance sodium/potassium-ion batteries with a wide working temperature range [J]. | INORGANIC CHEMISTRY FRONTIERS , 2024 , 11 (7) : 2164-2177 . |
| MLA | Xiao, Fuyu et al. "Defect-engineered WSxSe2-x nanocrystals anchored on selenized polyacrylonitrile fibers toward high-performance sodium/potassium-ion batteries with a wide working temperature range" . | INORGANIC CHEMISTRY FRONTIERS 11 . 7 (2024) : 2164-2177 . |
| APA | Xiao, Fuyu , Zhang, Jingran , Zhou, Weiming , Fang, Yixing , He, Xiaotong , Lai, Wenbin et al. Defect-engineered WSxSe2-x nanocrystals anchored on selenized polyacrylonitrile fibers toward high-performance sodium/potassium-ion batteries with a wide working temperature range . | INORGANIC CHEMISTRY FRONTIERS , 2024 , 11 (7) , 2164-2177 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Perovskite solar cells (PSCs) fabricated of TiO2 electron transporting material (ETM) have aroused tremendous attention, but their power conversion efficiency (PCE) needs further improvements. In this study, for the first time, zirconium (Zr)-doped brookite TiO2 nanorods (ZTO) are synthesized by a facile route and subsequently employed as an ETM in PSCs which finally achieves a considerable PCE of 19.42 % by optimizing all operating conditions. Further characterizations have been undertaken to explore in detail the effects of Zr doping on the nature of the perovskite active layer and the photovoltaic performance. As a consequence, the enhanced PCE can be ascribed to the high quality perovskite crystals and a more favorable energy level alignment between the perovskite layer and ZTO mesoporous layer.
Keyword ：
Electron transporting material Electron transporting material Perovskite solar cells Perovskite solar cells Photovoltaic performance Photovoltaic performance Zr-doped brookiteTiO2 Zr-doped brookiteTiO2
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Xie, Fengyan , Huang, Chunlei , Dong, Guofa et al. One-step hydrothermal synthesis of Zr-doped brookite TiO2 nanorods for highly efficient perovskite solar cells [J]. | MATERIALS RESEARCH BULLETIN , 2024 , 173 . |
| MLA | Xie, Fengyan et al. "One-step hydrothermal synthesis of Zr-doped brookite TiO2 nanorods for highly efficient perovskite solar cells" . | MATERIALS RESEARCH BULLETIN 173 (2024) . |
| APA | Xie, Fengyan , Huang, Chunlei , Dong, Guofa , Wu, Minghui , Wu, Kechen , Du, Shaowu et al. One-step hydrothermal synthesis of Zr-doped brookite TiO2 nanorods for highly efficient perovskite solar cells . | MATERIALS RESEARCH BULLETIN , 2024 , 173 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Export
| Results： |
Selected to |
| Format： |
