Query：
学者姓名：迟晓鹏
Refining：
Year
Type
Indexed by
Source
Complex
Co-
Language
Clean All
Abstract ：
碳酸锶是维持锌电解顺行的关键添加剂之一.通过盐酸浸出含锶阳极泥获得含锶浸出液,进一步添加碳酸钠析出碳酸锶,实现了从含锶阳极泥回收碳酸锶并返用于锌电解液的新工艺.探究了反应温度、反应时间、液固比、碳酸钠添加量等条件的优化.在浸出温度65 ℃、浸出时间3 h、液固比30 mL/g、碳酸钠添加量为硫酸锶摩尔量的1.5倍时,阳极泥中锶的回收率为37.6％,所获碳酸锶产品含锶42.9％(等同71.5％SrCO3),主要杂质为锌、锰.考虑到Zn2+及Mn2+均为锌电解液的主要离子,因此在所获碳酸锶产品作为添加剂返用于电解液时上述杂质不会对电解过程造成负面影响.研究结果有望为锌冶炼阳极泥中锶资源的回收利用提供参考.
Keyword ：
含锶阳极泥 含锶阳极泥 添加剂 添加剂 碳酸锶 碳酸锶 锌电沉积 锌电沉积
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | 段宇坤 , 邱小玲 , 苏国晖 et al. 含锶阳极泥湿法冶金制备碳酸锶 [J]. | 有色金属（冶炼部分） , 2025 , (4) : 201-208 . |
| MLA | 段宇坤 et al. "含锶阳极泥湿法冶金制备碳酸锶" . | 有色金属（冶炼部分） 4 (2025) : 201-208 . |
| APA | 段宇坤 , 邱小玲 , 苏国晖 , 张文泽 , 迟晓鹏 , 翁威 et al. 含锶阳极泥湿法冶金制备碳酸锶 . | 有色金属（冶炼部分） , 2025 , (4) , 201-208 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
为有效回收某高硫铜钨矿石中的有价金属提供可靠技术方案,针对该矿石开展工艺矿物学以及选矿试验研究.多元素化学分析结果表明该高硫铜钨矿石含铜0.26%,含钨1.06%,含硫4.71%,其中主要有价矿石类型为黄铜矿、黑钨矿、白钨矿、黄铁矿.由于该矿石特征复杂,有价矿石综合回收难度较大,根据该矿石工艺矿物学特征,采用原矿重选-磁选-浮选-重选工艺流程综合回收该矿石中的有价金属,并最终获得铜精矿铜品位为18.5%,铜回收率为62.67%,钨精矿品位为65.13%,钨回收率为62.65%,为该矿石有效回收有价金属提供了高效可行方案.
Keyword ：
工艺矿物学 工艺矿物学 浮选 浮选 选矿药剂 选矿药剂 选矿试验 选矿试验 高硫铜钨矿石 高硫铜钨矿石
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | 丁辉 , 洪阳航 , 邓哲元 et al. 某含硫铜钨矿综合回收选矿试验研究 [J]. | 世界有色金属 , 2025 , (2) : 1-4 . |
| MLA | 丁辉 et al. "某含硫铜钨矿综合回收选矿试验研究" . | 世界有色金属 2 (2025) : 1-4 . |
| APA | 丁辉 , 洪阳航 , 邓哲元 , 李恩霖 , 迟晓鹏 . 某含硫铜钨矿综合回收选矿试验研究 . | 世界有色金属 , 2025 , (2) , 1-4 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
氰化物具有高毒性,在黄金选冶过程中会产生大量的含氰废水及尾渣亟待处理.随着环保政策的日益完善及人们环保意识的逐渐增强,绿色、无毒的非氰浸金药剂逐渐成为研究热点.在过去几十年中,已研发了三十余种非氰浸金药剂及方法,包括硫脲、硫代硫酸盐、硫氰酸盐、卤化法、多硫化物法和氨基酸等.由于存在种种技术障碍,当前非氰浸金药剂的开发与应用大都集中在实验室规模或中试试验规模.此外,还有部分学者聚焦于新型环保提金药剂的开发与应用.这类提金药剂在某些复杂难处理金矿工业实践中具有比氰化物更好的选择性、更快的浸出速率和安全环保等优点,但也存在药剂耗量较大、使用条件复杂、提金机理不明确,提金尾液污染环境等问题.鉴于此,本文详细介绍了各类浸金药剂的性质,系统阐述和讨论各类药剂的提金机理、发展现状及优缺点,最后总结并展望了各类提金药剂的潜在工业应用前景.
Keyword ：
氰化法 氰化法 浸出机理 浸出机理 浸金药剂 浸金药剂 湿法冶金 湿法冶金 金 金 非氰化法 非氰化法
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | 陈俊南 , 衷水平 , 翁威 et al. 湿法提金技术进展及机理探讨 [J]. | 矿冶 , 2025 , 34 (1) : 1-11 . |
| MLA | 陈俊南 et al. "湿法提金技术进展及机理探讨" . | 矿冶 34 . 1 (2025) : 1-11 . |
| APA | 陈俊南 , 衷水平 , 翁威 , 迟晓鹏 , 谭文 , 蔡教忠 et al. 湿法提金技术进展及机理探讨 . | 矿冶 , 2025 , 34 (1) , 1-11 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Efficient removal of iron and aluminum impurities is critical for the extraction of lithium and rubidium from zinnwaldite, a lithium-bearing mineral. In this study, solvent extraction using P507 was employed to remove iron and aluminum from zinnwaldite leaching solutions. However, stripping iron from the organic phase proved challenging due to the strong interaction between iron ions and the extractant. To address this, a novel reduction stripping method was developed using ascorbic acid (AA) as a reductant. This method exploits the reduction of Fe3+ to Fe2+ in the aqueous phase, weakening the binding between iron ions and the organic phase, thus enabling efficient stripping. The optimized process achieved over 99.99% removal of iron and aluminum impurities. Subsequently, rubidium was selectively extracted using t-BAMBP, with a total recovery rate of 88.53%. Scaling-up experiments confirmed the feasibility of the process for industrial applications, demonstrating high efficiency and reagent recyclability. This study offers a promising approach for the efficient extraction and separation of valuable metals from zinnwaldite, with potential for broader applications in metal processing.
Keyword ：
extraction extraction impurity impurity rubidium rubidium stripping stripping zinnwaldite zinnwaldite
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Tan, Wen , Yang, Yanbo , Liang, Donghui et al. Study on Impurity Removal from Lepidolite Leaching Solution and the Extraction Process of Rubidium [J]. | MINERALS , 2025 , 15 (1) . |
| MLA | Tan, Wen et al. "Study on Impurity Removal from Lepidolite Leaching Solution and the Extraction Process of Rubidium" . | MINERALS 15 . 1 (2025) . |
| APA | Tan, Wen , Yang, Yanbo , Liang, Donghui , Weng, Wei , Chi, Xiaopeng , Zhong, Shuiping . Study on Impurity Removal from Lepidolite Leaching Solution and the Extraction Process of Rubidium . | MINERALS , 2025 , 15 (1) . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
The novel amidoxime-based collectors, 4-pyridylamidoxime (PA), 3-ethyl-4-pyridylamidoxime (EPA), and 3methyl-5-tert-butyl-4-pyridylamidoxime (MBPA), were introduced in the lead-free flotation separation of wolframite from quartz and calcite. Compared with PA, EPA, and the traditional collector benzohydroxamic acid (BHA), MBPA exhibited a better separation and recovery capacity to wolframite ore. 4.0 x 10(-4) mol/L MBPA recovered more than 80 % wolframite, similar to 24 % calcite, and similar to 26 % quartz at pH 8.0 without Pb2+ ions. Under the same conditions, BHA only floated out less than 35 % wolframite. The adsorption amount results exhibited a stronger adsorption ability of MBPA than BHA on wolframite surface. Further, the results of zeta-potential, FTIR, XPS and density functional theory (DFT) calculation revealed that MBPA could chemisorb on wolframite surface to form -N-Fe and -O-Fe bonds. MBPA had stronger electron-donating ability and weaker electron-accepting ability than BHA, which exhibited higher reaction activity. It was clear that MBPA was an excellent collector in the lead-free flotation separation of wolframite from calcite and quartz.
Keyword ：
Calcite Calcite Chelation Chelation Lead-free flotation Lead-free flotation Quartz Quartz Selectivity Selectivity Wolframite Wolframite
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Zeng, Guangsheng , Weng, Wei , Zhong, Shuiping et al. Amidoxime collectors: Lead-free flotation performance and adsorption mechanism in the separation of wolframite, quartz and calcite [J]. | MINERALS ENGINEERING , 2025 , 222 . |
| MLA | Zeng, Guangsheng et al. "Amidoxime collectors: Lead-free flotation performance and adsorption mechanism in the separation of wolframite, quartz and calcite" . | MINERALS ENGINEERING 222 (2025) . |
| APA | Zeng, Guangsheng , Weng, Wei , Zhong, Shuiping , Chi, Xiaopeng , Cai, Jiaozhong , Tan, Wen et al. Amidoxime collectors: Lead-free flotation performance and adsorption mechanism in the separation of wolframite, quartz and calcite . | MINERALS ENGINEERING , 2025 , 222 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Copper foil roughness is widely regarded as an important factor affecting the performance of lithium-ion batteries, but relevant research still lacks systematic and in-depth analysis. In this paper, 6 mu m copper foil is prepared by electrodeposition and compared with purchased 6 mu m copper foil. The influence of different roughness on the battery performance is analyzed by the distribution of relaxation time (DRT). The results show that the roughness of homemade copper foil (1.69 mu m) is slightly higher than that of purchased copper foil (1.53 mu m). The initial charging specific capacity of the homemade copper foil electrode reaches 372.51 mAh g-1, significantly higher than that of the purchased copper foil electrode (323.89 mAh g-1). DRT is used to analyze the electrochemical reaction kinetics of the batteries, it is found that the copper foil with a certain roughness can enhance its binding with the active substance, ensure stable and rapid conductive contact, reduce the side reaction caused by uneven lithiation, and minimize the increase in the impedance of each part during the electrode cycle, thereby ensuring stable battery operation. This study provides new insights into the application of copper foil in batteries and verifies the feasibility of homemade 6 mu m copper foil.
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Yang, Lei , Lu, Xige , Zhong, Shuiping et al. Study on the influence of copper foil current collector roughness on lithium-ion battery performance [J]. | JOURNAL OF MATERIALS SCIENCE , 2025 , 60 (18) : 7641-7652 . |
| MLA | Yang, Lei et al. "Study on the influence of copper foil current collector roughness on lithium-ion battery performance" . | JOURNAL OF MATERIALS SCIENCE 60 . 18 (2025) : 7641-7652 . |
| APA | Yang, Lei , Lu, Xige , Zhong, Shuiping , Zhu, Huanlin , Weng, Wei , Tan, Wen et al. Study on the influence of copper foil current collector roughness on lithium-ion battery performance . | JOURNAL OF MATERIALS SCIENCE , 2025 , 60 (18) , 7641-7652 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Introducing a conductive carbon layer between the copper foil current collector and silicon active material effectively mitigates electrode damage and battery capacity loss caused by uneven silicon expansion. In this study, a low-cost, environmentally friendly carbon-coated copper foil (CCF) is designed using zeolitic imidazolate framework 8-derived carbon (ZPC) as the carbon source, polyethylenepyrrolidone (PVP) as the binder, and deionized water as the solvent. The large surface area and porosity of ZPC effectively accommodate the volume expansion of silicon, thereby enhancing the overall performance of the battery. The bare copper foil electrode experiences rapid decay, with a failure occurring after just 75 cycles at 0.5 C. In contrast, the CCF electrode maintains a reversible capacity of 576.8 mAh/g even after 200 cycles. The CCF electrode demonstrates superior specific capacity and cycle stability in both the rate and cycling test. According to the relaxation time distribution (DRT) analysis, the porous carbon layer on the CCF surface ensures excellent electrical contact between silicon and the Cu foil during cycling, facilitates uniform lithium insertion into silicon, prevents uncontrolled growth of the SEI layer, and guarantees stable battery operation. This CCF preparation process provides a promising solution to mitigate the degradation of battery performance caused by silicon expansion.
Keyword ：
carbon-coated copperfoil carbon-coated copperfoil current collector current collector lithium-ion battery lithium-ion battery Si Si ZIF-8-derived carbon ZIF-8-derived carbon
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Yang, Lei , Liu, Hongyu , Zhong, Shuiping et al. Preparing Carbon-Coated Copper Foil with a Low-Cost and Environmentally Friendly Carbon Slurry to Stabilize Silicon Anode for Lithium-Ion Battery [J]. | ACS APPLIED MATERIALS & INTERFACES , 2025 , 17 (13) : 19648-19656 . |
| MLA | Yang, Lei et al. "Preparing Carbon-Coated Copper Foil with a Low-Cost and Environmentally Friendly Carbon Slurry to Stabilize Silicon Anode for Lithium-Ion Battery" . | ACS APPLIED MATERIALS & INTERFACES 17 . 13 (2025) : 19648-19656 . |
| APA | Yang, Lei , Liu, Hongyu , Zhong, Shuiping , Weng, Wei , Tan, Wen , Chi, Xiaopeng . Preparing Carbon-Coated Copper Foil with a Low-Cost and Environmentally Friendly Carbon Slurry to Stabilize Silicon Anode for Lithium-Ion Battery . | ACS APPLIED MATERIALS & INTERFACES , 2025 , 17 (13) , 19648-19656 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Electroplating gold coating is very important for both jewelry industry and fabrication of functional materials. The traditional process for gold plating is fulfilled in the cyanide-containing solution, which can potentially produce hazardous HCN gas during electrodeposition and generate hazardous CN--containing wastewater. In addition, the residual CN- ions in substrate can damage the post-coated microelectronics. Cyanide-free processes for electroplating gold are springing up these years, showing great potential for replacing the environmentally unfriendly cyanide process. In this review, the types of gold coatings are first summarized. Then the physicochemical properties of various cyanide-free complexing agents for electroplating gold film are compared. Subsequently, cyanide-free systems that have great potential for industrialization are introduced, with other novel cyanide-free systems still on its infant being also suggested. Finally, the existing problems and future developments are anticipated. The contents can hopefully provide comprehensive understanding of the cyanide-free gold electroplating process.
Keyword ：
Cyanide-free Cyanide-free Electrodeposition Electrodeposition Gold plating Gold plating
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Zhong, Shuiping , Xu, Tingyu , Chi, Xiaopeng et al. Cyanide-Free Electroplating for Gold Coatings: A Review [J]. | JOURNAL OF SUSTAINABLE METALLURGY , 2025 , 11 (2) : 735-753 . |
| MLA | Zhong, Shuiping et al. "Cyanide-Free Electroplating for Gold Coatings: A Review" . | JOURNAL OF SUSTAINABLE METALLURGY 11 . 2 (2025) : 735-753 . |
| APA | Zhong, Shuiping , Xu, Tingyu , Chi, Xiaopeng , Tan, Wen , Weng, Wei , Tang, Ding . Cyanide-Free Electroplating for Gold Coatings: A Review . | JOURNAL OF SUSTAINABLE METALLURGY , 2025 , 11 (2) , 735-753 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Talc is a layered silicate mineral with pronounced crystal anisotropy, consisting of a basal (001) surface and an edge (100) surface, which complicates its separation from valuable minerals. In this study, tannic acid (TA) was used as a depressant, and its adsorption behaviors on the two representative surfaces of talc-silica (basal plane surface) and magnesium silicate (edge surface)-were systematically investigated using experimental methods and molecular simulations. TA addition reduced the contact angles of the talc basal and edge surfaces by 30.5 degrees and 22.7 degrees, respectively, indicating enhanced hydrophilicity. ToF-SIMS analysis revealed that TA physically adsorbs onto the silica surface, while both physical and chemical interactions occur on the magnesium silicate surface. AFM showed lumpy adsorbate on the silica surface and point-like adsorbate on the magnesium silicate surface, with a greater roughness change observed for the former. QCM-D measurements confirmed that TA formed a multilayer flexible adsorbate on the silica surface and a dense, rigid monolayer on the magnesium silicate surface. Molecular dynamics simulations further revealed that van der Waals interactions dominated TA adsorption on the (001) surface, while electrostatic interactions prevailed on the (100) surface. These findings provide insight into the selective depression mechanism of talc and offer guidance for the depression of other layered silicate minerals.
Keyword ：
Adsorption behavior Adsorption behavior Basal plane surface Basal plane surface Edge surface Edge surface Talc Talc Tannic acid Tannic acid
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Cai, Jiaozhong , Zhong, Shuiping , Deng, Jiushuai et al. Study on the adsorption behavior and adsorption mechanism of green depressant TA on the basal plane and edge surface of talc [J]. | MINERALS ENGINEERING , 2025 , 232 . |
| MLA | Cai, Jiaozhong et al. "Study on the adsorption behavior and adsorption mechanism of green depressant TA on the basal plane and edge surface of talc" . | MINERALS ENGINEERING 232 (2025) . |
| APA | Cai, Jiaozhong , Zhong, Shuiping , Deng, Jiushuai , Wu, Bozeng , Xu, Chengyan , Chi, Xiaopeng et al. Study on the adsorption behavior and adsorption mechanism of green depressant TA on the basal plane and edge surface of talc . | MINERALS ENGINEERING , 2025 , 232 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Conventional silver powder production routes, which reduce silver nitrate solution in the presence of a polymer protective agent, complicate subsequent powder cleaning and wastewater treatment. This study proposes a sulfate-based inorganic protective agent (utilizing Ag2SO4 precursor replacement) that serves dual functions: morphology stabilization and wastewater treatment simplification. This innovation enables the environmentally friendly preparation of sub-micron spherical silver powder. The effects of peristaltic pump flow rate, pH value, temperature, concentration ratio of oxidant to reducing agent on the particle size and morphology of silver powder were systematically investigated. The resulting silver powder exhibited an average particle size of 0.64 +/- 0.05 mu m and excellent thermal stability (weight loss rate < 0.50 % up to 1000 degrees C). Mechanistic analysis via combined XRD, Zeta potential measurements, and density functional theory (DFT) calculations revealed that SO(4)(2- )preferentially adsorbs on Ag(111) facet via chemisorption. Moreover, the production wastewater can be directly treated biochemically after calcium oxide precipitation and air-stripping treatment. Furthermore, the scale-up experiment (single yield 50.0 g) showed that the performance of the experimental product was consistent with the lab-scale results, indicating that the process has good reproducibility.
Keyword ：
Ascorbic acid Ascorbic acid Density functional theory Density functional theory Silver powder Silver powder Silver sulfate Silver sulfate Sulfate ions Sulfate ions
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Chen, Jianghao , Huang, Shaoyi , Zhong, Shuiping et al. Scalable synthesis of submicron spherical silver powders mediated by sulfate ions: Dual-function protection mechanism for morphology control and simplified wastewater treatment [J]. | JOURNAL OF CLEANER PRODUCTION , 2025 , 525 . |
| MLA | Chen, Jianghao et al. "Scalable synthesis of submicron spherical silver powders mediated by sulfate ions: Dual-function protection mechanism for morphology control and simplified wastewater treatment" . | JOURNAL OF CLEANER PRODUCTION 525 (2025) . |
| APA | Chen, Jianghao , Huang, Shaoyi , Zhong, Shuiping , Tan, Wen , Zeng, Guangsheng , Weng, Wei et al. Scalable synthesis of submicron spherical silver powders mediated by sulfate ions: Dual-function protection mechanism for morphology control and simplified wastewater treatment . | JOURNAL OF CLEANER PRODUCTION , 2025 , 525 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Export
| Results： |
Selected to |
| Format： |
