Home>Scholars

  • Complex
  • Title
  • Keyword
  • Abstract
  • Scholars
  • Journal
  • ISSN
  • Conference
成果搜索

刘东

高级实验师

机械工程及自动化学院

Total Results: 81

Query:

所有字段:(空)

Refining:

Clean All

Sort by:
Default
  • Default
  • Title
  • Year
  • WOS Cited Count
  • Impact factor
  • Ascending
  • Descending
< Page ,Total 8 >
Mo对00Cr20Ni20耐热钢高温氧化行为影响 PKU
期刊论文 | 2023 , 43 (5) , 660-663 | 特种铸造及有色合金
Abstract&Keyword Cite

Abstract :

采用增重法测得了800℃下00Cr20Ni20与00Cr20Ni20Mo4两种耐热钢在空气中氧化100 h的氧化动力学曲线,并结合SEM、EDS及XRD等方法研究了Mo对00Cr20Ni20耐热钢高温氧化行为的影响.结果表明,氧化前期Mo会加速材料氧化以快速形成有效厚度的氧化膜,随氧化时间延长,00Cr20Ni20Mo4耐热钢逐渐表现出更优异的抗氧化性能.氧化膜分为内外两层,00Cr20Ni20耐热钢的氧化膜产生了平行表面的裂纹,00Cr20Ni20Mo4耐热钢的氧化膜完整且厚度显著薄于前者.两种耐热钢的表面氧化膜均由(Cr,Fe)2 O3和(Cr,Fe)3 O4构成,Mo会使(Cr,Fe)3 O4占比升高.00Cr20Ni20耐热钢表面氧化物为片状,00Cr20Ni20Mo4耐热钢的为球状,且球面上覆盖许多细小片状氧化物.

Keyword :

00Cr20Ni20耐热钢 00Cr20Ni20耐热钢 Mo Mo 氧化膜 氧化膜 高温氧化 高温氧化

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 王钦娟 , 林少阳 , 刘东 . Mo对00Cr20Ni20耐热钢高温氧化行为影响 [J]. | 特种铸造及有色合金 , 2023 , 43 (5) : 660-663 .
MLA 王钦娟 等. "Mo对00Cr20Ni20耐热钢高温氧化行为影响" . | 特种铸造及有色合金 43 . 5 (2023) : 660-663 .
APA 王钦娟 , 林少阳 , 刘东 . Mo对00Cr20Ni20耐热钢高温氧化行为影响 . | 特种铸造及有色合金 , 2023 , 43 (5) , 660-663 .
Export to NoteExpress RIS BibTex

Version :

Effect of Cu content on microstructure, antibacterial and corrosion resistance of UNS S33207 hyper-duplex stainless steel EI CSCD PKU
期刊论文 | 2022 , 53 (8) , 2886-2897 | Journal of Central South University (Science and Technology)
Abstract&Keyword Cite

Abstract :

Different types of antibacterial super duplex stainless steel materials were prepared by adding different contents of Cu to UNS S33207 super duplex stainless steel and undergoing solid solution and antibacterial aging treatment. The optical microscope(OM), scanning electron microscope(SEM), transmission electron microscope (TEM), coating method, ICP-MS mass spectrometer, electrochemical test and other methods were used to study the effect of Cu content on the organization, antibacterial and corrosion resistance of UNS S33207 material. The results show that the number of precipitated copper-rich phases increases with the increase of Cu content; when the Cu content is less than 2.55%(mass fraction), the copper-rich phases preferentially precipitate in the ferrite and phase boundaries. When the Cu content is further increased, the copper-rich phase will precipitate in the austenite; the size of the copper-rich phase precipitated in the ferrite is tens of nanometers, and the shape is spherical or ellipsoidal with a stable FCC structure, and the matrix is a non-coherent relationship. With the increase of Cu content, the dissolution rate of Cu ions increases, which results in the increase of antibacterial performance of the material, and its antibacterial rate increases with the prolongation of the action time with the bacterial liquid. The the copper-rich phase is a weak point in the passivation film. The more its content, the worse the corrosion resistance of the material. The Cu content should be appropriate to ensure the normal and relevant performance of the material. © 2022 Central South University of Technology. All rights reserved.

Keyword :

Copper corrosion Copper corrosion Corrosion resistance Corrosion resistance Ferrite Ferrite Heavy ions Heavy ions Passivation Passivation Scanning electron microscopy Scanning electron microscopy Steel corrosion Steel corrosion Transmission electron microscopy Transmission electron microscopy

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 Xiang, Hongliang , Rao, Shaohui , Zheng, Kaikui et al. Effect of Cu content on microstructure, antibacterial and corrosion resistance of UNS S33207 hyper-duplex stainless steel [J]. | Journal of Central South University (Science and Technology) , 2022 , 53 (8) : 2886-2897 .
MLA Xiang, Hongliang et al. "Effect of Cu content on microstructure, antibacterial and corrosion resistance of UNS S33207 hyper-duplex stainless steel" . | Journal of Central South University (Science and Technology) 53 . 8 (2022) : 2886-2897 .
APA Xiang, Hongliang , Rao, Shaohui , Zheng, Kaikui , Liu, Dong . Effect of Cu content on microstructure, antibacterial and corrosion resistance of UNS S33207 hyper-duplex stainless steel . | Journal of Central South University (Science and Technology) , 2022 , 53 (8) , 2886-2897 .
Export to NoteExpress RIS BibTex

Version :

Cu含量对UNS S33207特超级双相不锈钢组织、抗菌性和耐蚀性的影响 CSCD PKU
期刊论文 | 2022 , 53 (08) , 2886-2897 | 中南大学学报(自然科学版)
Abstract&Keyword Cite

Abstract :

通过向UNS S33207特超级双相不锈钢中添加不同含量的Cu并经固溶加抗菌时效处理,制备不同类抗菌特超级双相不锈钢材料。利用光学显微镜(OM)、扫描电镜(SEM)、透射电镜(TEM)、覆膜法、ICP-MS质谱检测仪、电化学测试等方法研究Cu含量对UNS S33207组织、抗菌性和耐蚀性的影响。研究结果表明,富铜相析出量随着Cu含量的增加而增多;当Cu含量低于2.55%(质量分数)时,富铜相优先在铁素体及相界析出,进一步增加Cu含量,奥氏体也会析出富铜相;铁素体中析出的富铜相的尺寸为几十纳米,形态呈球状或椭球状,具有稳定的FCC结构,与基体为非共格关系。随Cu含量的增加,Cu离子溶出率增大,抗...

Keyword :

Cu含量 Cu含量 富铜相 富铜相 抗菌性能 抗菌性能 特超级双相不锈钢 特超级双相不锈钢 耐蚀性能 耐蚀性能

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 向红亮 , 饶少辉 , 郑开魁 et al. Cu含量对UNS S33207特超级双相不锈钢组织、抗菌性和耐蚀性的影响 [J]. | 中南大学学报(自然科学版) , 2022 , 53 (08) : 2886-2897 .
MLA 向红亮 et al. "Cu含量对UNS S33207特超级双相不锈钢组织、抗菌性和耐蚀性的影响" . | 中南大学学报(自然科学版) 53 . 08 (2022) : 2886-2897 .
APA 向红亮 , 饶少辉 , 郑开魁 , 刘东 . Cu含量对UNS S33207特超级双相不锈钢组织、抗菌性和耐蚀性的影响 . | 中南大学学报(自然科学版) , 2022 , 53 (08) , 2886-2897 .
Export to NoteExpress RIS BibTex

Version :

QPQ技术中渗氮时间对合金铸铁组织及摩擦性能的影响 CSCD PKU
期刊论文 | 2021 , 46 (10) , 226-231 | 金属热处理
Abstract&Keyword Cite

Abstract :

采用OM、SEM、硬度测试、摩擦磨损试验等方法研究了QPQ技术中渗氮时间对合金铸铁组织与摩擦性能的影响.结果表明,QPQ处理后,合金铸铁表面形成的渗层物相主要由Fe2-3 N、Fe2 O3和FeO组成.渗层厚度的平方与渗氮时间存在线性关系,在580℃渗氮盐浴条件下,氮元素在合金铸铁中的扩散激活能为70.07 kJ/mol.在90~150 min渗氮时间内,随着渗氮时间延长,渗层的表面硬度值由522 HV0.05降低至441 HV0.05,当渗氮时间延长至180 min,表面硬度值回升至455 HV0.05.与未处理试样相比,QPQ处理的试样具有更小的摩擦因数,并且QPQ处理后试样表面的犁沟显著变浅,表面的金属剥落也得到明显改善,且随着渗氮时间的增加,渗层厚度增加且稳定材料.经180 min渗氮处理的QPQ试样具有最优综合性能,表面硬度值为455 HV0.05,摩擦因数为0.32.

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 王钦娟 , 林少阳 , 陈忠士 et al. QPQ技术中渗氮时间对合金铸铁组织及摩擦性能的影响 [J]. | 金属热处理 , 2021 , 46 (10) : 226-231 .
MLA 王钦娟 et al. "QPQ技术中渗氮时间对合金铸铁组织及摩擦性能的影响" . | 金属热处理 46 . 10 (2021) : 226-231 .
APA 王钦娟 , 林少阳 , 陈忠士 , 刘东 . QPQ技术中渗氮时间对合金铸铁组织及摩擦性能的影响 . | 金属热处理 , 2021 , 46 (10) , 226-231 .
Export to NoteExpress RIS BibTex

Version :

感应淬火对合金铸铁组织与油摩擦性能的影响 CSCD PKU
期刊论文 | 2020 , 49 (11) , 236-244 | 表面技术
Abstract&Keyword Cite

Abstract :

目的优化感应淬火工艺,为提高合金铸铁表面硬度及耐磨性能提供理论依据。方法通过热力学计算和同步热分析法测试分析了合金铸铁相变规律,并对该材料在6 kW和8 kW功率下进行了2~8 s高频表面淬火。采用扫描电镜(SEM)、洛氏硬度计、摩擦磨损试验机,研究了不同感应淬火工艺对合金铸铁显微组织、硬度和摩擦磨损性能的影响。结果合金铸铁经感应淬火后,组织为珠光体+马氏体+石墨+磷共晶,随加热时间延长,马氏体含量增多,珠光体与磷共晶逐渐减少,直至6 kW/8 s、8 kW/6 s时消失,但是继续延长时间会产生裂纹。硬化区硬度随加热时间增长而提高,峰值为50HRC,二者的关系可用Logistic曲线描述。硬度...

Keyword :

合金铸铁 合金铸铁 感应淬火 感应淬火 显微组织 显微组织 油摩擦 油摩擦 相转变 相转变 硬度 硬度

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 林少阳 , 刘东 , 程超增 . 感应淬火对合金铸铁组织与油摩擦性能的影响 [J]. | 表面技术 , 2020 , 49 (11) : 236-244 .
MLA 林少阳 et al. "感应淬火对合金铸铁组织与油摩擦性能的影响" . | 表面技术 49 . 11 (2020) : 236-244 .
APA 林少阳 , 刘东 , 程超增 . 感应淬火对合金铸铁组织与油摩擦性能的影响 . | 表面技术 , 2020 , 49 (11) , 236-244 .
Export to NoteExpress RIS BibTex

Version :

Visible light driven recyclable micromotors for "on-the-fly" water remediation SCIE
期刊论文 | 2020 , 258 | MATERIALS LETTERS
WoS CC Cited Count: 8
Abstract&Keyword Cite

Abstract :

Organic pollutant, originating from both industry and domestic waste, has been greatly threatening the waters all over the world. Micromotors, integrated with photocatalysis, provide a promising solution to this critical challenge. In this work, by taking advantage of the positive motion of the micromotors and visible light response of photocatalysis, we fabricated BiOI microspheres based micromotors and applied them into organic pollutant removal in water. The motion characterization and dye degradation tests demonstrate that "on-the-fly" water remediation is realized under visible light irradiation. What's more, with the iron oxide nanoparticles embedded, the micromotors are recycled using magnet and reused in organic pollutant degradation. (C) 2019 Elsevier B.V. All rights reserved.

Keyword :

BiOI BiOI Micromotor Micromotor Visible light Visible light Water remediation Water remediation

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 Zhan, Ziheng , Wei, Fanan , Zheng, Jianghong et al. Visible light driven recyclable micromotors for "on-the-fly" water remediation [J]. | MATERIALS LETTERS , 2020 , 258 .
MLA Zhan, Ziheng et al. "Visible light driven recyclable micromotors for "on-the-fly" water remediation" . | MATERIALS LETTERS 258 (2020) .
APA Zhan, Ziheng , Wei, Fanan , Zheng, Jianghong , Yin, Chao , Yang, Wenguang , Yao, Ligang et al. Visible light driven recyclable micromotors for "on-the-fly" water remediation . | MATERIALS LETTERS , 2020 , 258 .
Export to NoteExpress RIS BibTex

Version :

坩埚钳 incoPat
专利 | 2019/3/26 | CN201920389276.1
Abstract&Keyword Cite

Abstract :

本实用新型涉及一种坩埚钳,包括钳体、夹持体,所述钳体包括两个钳柄,两个钳柄中部铰接,钳柄一端为握持端,另一端为夹持端,夹持体设置在夹持端内侧,夹持体与钳柄铰接,本实用新型结构简单,设计合理,操作使用方便,使钳口的夹持体能在钳体闭合面内利用自重转动,使夹持体始终竖直向下。

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 刘东 , 林少阳 , 向红亮 . 坩埚钳 : CN201920389276.1[P]. | 2019/3/26 .
MLA 刘东 et al. "坩埚钳" : CN201920389276.1. | 2019/3/26 .
APA 刘东 , 林少阳 , 向红亮 . 坩埚钳 : CN201920389276.1. | 2019/3/26 .
Export to NoteExpress RIS BibTex

Version :

坩埚浇铸工装 incoPat
专利 | 2019/3/26 | CN201920389277.6
Abstract&Keyword Cite

Abstract :

本实用新型涉及一种坩埚浇铸工装,包括坩埚承载件、握持装置、防滑装置,坩埚承载件包括左右侧板,左右侧板之间经前护栏相连接,左右侧板与前护栏围城容纳坩埚的坩埚抱腔,握持装置包括横置的手柄、延长柱,延长柱、手柄分别位于坩埚承载件左右旁侧,手柄与右侧板相连,延长柱与左侧板相连,防滑装置包括上下防滑钩,下防滑钩上端与前护栏围中部相连接,下防滑钩下端的钩部位于前护栏围下方,上防滑钩下端与手柄靠右侧板那端相连接,上防滑钩上端位于前护栏围上方,当坩埚位于坩埚抱腔,工人用手柄侧提起坩埚时,由于坩埚与内部金属液自重,坩埚抱腔可将坩埚抱死,若滑脱,下防滑钩可起到防护作用,倾倒时,上防滑钩可防止坩埚从顶部滑脱。

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 刘东 , 林少阳 , 向红亮 . 坩埚浇铸工装 : CN201920389277.6[P]. | 2019/3/26 .
MLA 刘东 et al. "坩埚浇铸工装" : CN201920389277.6. | 2019/3/26 .
APA 刘东 , 林少阳 , 向红亮 . 坩埚浇铸工装 : CN201920389277.6. | 2019/3/26 .
Export to NoteExpress RIS BibTex

Version :

案例教学法在材料分析测试方法中的应用 CQVIP
期刊论文 | 2019 , 3 (12) , 7-8 | 教育信息化论坛
Abstract&Keyword Cite

Abstract :

材料分析测试方法是材料类专业一门非常重要的专业基础课程。案例教学法旨在激发学生对该课程的学习兴趣,对优化课程体系、改革教学内容、创新人才培养模式、提高人才培养质量具有深远意义。案例教学法可根据该课程的特点精心选择案例,能够显著提高教学质量。

Keyword :

教学质量 教学质量 材料分析测试方法 材料分析测试方法 案例教学 案例教学

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 邓丽萍 , 向红亮 , 刘东 et al. 案例教学法在材料分析测试方法中的应用 [J]. | 教育信息化论坛 , 2019 , 3 (12) : 7-8 .
MLA 邓丽萍 et al. "案例教学法在材料分析测试方法中的应用" . | 教育信息化论坛 3 . 12 (2019) : 7-8 .
APA 邓丽萍 , 向红亮 , 刘东 , 何福善 . 案例教学法在材料分析测试方法中的应用 . | 教育信息化论坛 , 2019 , 3 (12) , 7-8 .
Export to NoteExpress RIS BibTex

Version :

Erosion-corrosion behavior of SAF3207 hyper-duplex stainless steel SCIE CSCD
期刊论文 | 2019 , 26 (11) , 1415-1426 | INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS
Abstract&Keyword Cite

Abstract :

Polarization curves and mass losses of SAF3207 hyper-duplex stainless steel under various conditions were measured. The damaged surfaces after erosion-corrosion tests were characterized by scanning electron microscopy. The results showed that an increase in flow velocity could enhance the electrochemical corrosion and consequently decrease the passivation properties of the steel. The erosion-corrosion damage of the samples increased substantially when the flow velocity exceeded the critical value of 4 m.s(-1). The mass loss rate increased as the sand content increased, reaching a maximum at 7wt% sand content, corresponding to the most severe electrochemical corrosion damage. When the sand content was increased further, however, the mass loss rate decreased and then tended stable. The mass loss was divided into incubation, sustained, and stationary periods, with a maximum mass loss rate of 12.97 g.h(-1).m(-2) after an erosion period of 2.5 h. The erosion-corrosion mechanism was investigated in detail.

Keyword :

electrochemical corrosion electrochemical corrosion erosion corrosion erosion corrosion flow velocity flow velocity hyper duplex stainless steel hyper duplex stainless steel microstructure morphology microstructure morphology

Cite:

Copy from the list or Export to your reference management。

GB/T 7714 Xiang, Hong-liang , Hu, Yu-rui , Cao, Hua-tang et al. Erosion-corrosion behavior of SAF3207 hyper-duplex stainless steel [J]. | INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS , 2019 , 26 (11) : 1415-1426 .
MLA Xiang, Hong-liang et al. "Erosion-corrosion behavior of SAF3207 hyper-duplex stainless steel" . | INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS 26 . 11 (2019) : 1415-1426 .
APA Xiang, Hong-liang , Hu, Yu-rui , Cao, Hua-tang , Liu, Dong , Dong, Xuan-pu . Erosion-corrosion behavior of SAF3207 hyper-duplex stainless steel . | INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS , 2019 , 26 (11) , 1415-1426 .
Export to NoteExpress RIS BibTex

Version :

10| 20| 50 per page
< Page ,Total 8 >

Export

Results:

Selected

to

Format:
Online/Total:359/9314001
Address:FZU Library(No.2 Xuyuan Road, Fuzhou, Fujian, PRC Post Code:350116) Contact Us:0591-22865326
Copyright:FZU Library Technical Support:Beijing Aegean Software Co., Ltd. 闽ICP备05005463号-1