Tribological behavior of a Ni-free Zr-based bulk metallic glass with potential for biomedical applications - Details

author：

Indexed by：

Abstract：

In　this　study,　the　tribological　behavior　of　a　Ni-free　Zr53Al16Co23·25Ag7.75　bulk　metallic　glass　(BMG)　was　investigated　in　dry-sliding　and　simulated　physiological　media　using　ball-on-disk　reciprocating　friction.　The　effects　of　sliding　load,　speed,　media　and　counterpart　materials　on　the　wear　resistance　of　the　Zr-Al-Co-Ag　BMG　were　illustrated.　Under　dry-sliding　in　air,　wear　resistance　of　the　Zr-based　BMG　decreases　with　increasing　sliding　load,　and　wear　deterioration　is　controlled　by　oxidation　and　abrasive　wear.　With　increasing　sliding　velocity,　larger　plastic　deformation　occurs　on　the　surface　of　BMG　due　to　the　frictional　heat.　The　BMG　exhibits　decreased　wear　resistance　in　0.9%　NaCl　and　phosphate　buffer　saline　(PBS)　solutions　in　comparison　with　that　in　air　and　deionized　water,　which　is　probably　associated　with　tribocorrosion　controlled　by　synergistic　effects　of　abrasive　and　corrosive　wear.　The　wear　resistance　of　the　Zr-based　BMG　against　Si3N4　counterpart　material　is　inferior　to　that　against　ZrO2,　whereas　the　case　is　contrary　to　that　against　Al2O3.　The　effect　of　ceramic　counterpart　materials　on　the　wear　resistance　of　BMG　is　discussed　based　on　their　Young＇s　modulus　and　fracture　toughness.　©　2016　Elsevier　B.V.　All　rights　reserved.

Keyword：

Alumina Aluminum alloys Aluminum oxide Cobalt alloys Corrosion Deionized water Deterioration Elastic moduli Fracture toughness Friction Glass Medical applications Metallic glass Saline water Silver alloys Sodium chloride Tribology Wear of materials Wear resistance Zircaloy Zirconia Zirconium alloys

Community：

[ 1 ] [Hua, Nengbin]Department of Materials Science and Engineering, Fujian University of Technology, Fuzhou; 350118, China
[ 2 ] [Hua, Nengbin]Department of Materials Science and Engineering, Fuzhou University, Fuzhou; 350116, China
[ 3 ] [Hua, Nengbin]Fujian Provincial Key Laboratory of Advanced Materials Processing and Application, Fuzhou; 350118, China
[ 4 ] [Chen, Wenzhe]Department of Materials Science and Engineering, Fujian University of Technology, Fuzhou; 350118, China
[ 5 ] [Chen, Wenzhe]Department of Materials Science and Engineering, Fuzhou University, Fuzhou; 350116, China
[ 6 ] [Chen, Wenzhe]Fujian Provincial Key Laboratory of Advanced Materials Processing and Application, Fuzhou; 350118, China
[ 7 ] [Wang, Weiguo]Department of Materials Science and Engineering, Fujian University of Technology, Fuzhou; 350118, China
[ 8 ] [Wang, Weiguo]Fujian Provincial Key Laboratory of Advanced Materials Processing and Application, Fuzhou; 350118, China
[ 9 ] [Lu, Haotian]Department of Materials Science and Engineering, Fujian University of Technology, Fuzhou; 350118, China
[ 10 ] [Lu, Haotian]Fujian Provincial Key Laboratory of Advanced Materials Processing and Application, Fuzhou; 350118, China
[ 11 ] [Ye, Xiaoyun]Department of Materials Science and Engineering, Fujian University of Technology, Fuzhou; 350118, China
[ 12 ] [Ye, Xiaoyun]Fujian Provincial Key Laboratory of Advanced Materials Processing and Application, Fuzhou; 350118, China
[ 13 ] [Li, Guanghui]Department of Materials Science and Engineering, Fujian University of Technology, Fuzhou; 350118, China
[ 14 ] [Li, Guanghui]Fujian Provincial Key Laboratory of Advanced Materials Processing and Application, Fuzhou; 350118, China
[ 15 ] [Lin, Chen]Department of Materials Science and Engineering, Fujian University of Technology, Fuzhou; 350118, China
[ 16 ] [Lin, Chen]Fujian Provincial Key Laboratory of Advanced Materials Processing and Application, Fuzhou; 350118, China
[ 17 ] [Huang, Xufang]Department of Materials Science and Engineering, Fujian University of Technology, Fuzhou; 350118, China
[ 18 ] [Huang, Xufang]Fujian Provincial Key Laboratory of Advanced Materials Processing and Application, Fuzhou; 350118, China

Reprint 's Address：

[hua, nengbin]fujian provincial key laboratory of advanced materials processing and application, fuzhou; 350118, china;;[hua, nengbin]department of materials science and engineering, fuzhou university, fuzhou; 350116, china;;[hua, nengbin]department of materials science and engineering, fujian university of technology, fuzhou; 350118, china

Email：

Show more details

Related Keywords：

Enhanced wear resistance in (CoCrNi)94Al3Ti3 medium-entropy alloy at high temperatures via nano-Al2O3 reinforcing phase
2024，Tribology International
The wear mechanisms transition map of plasma sprayed Al2O3-13wt.% TiO2 coating under dry sliding
2009，Tribology
Tribological behavior of a Ni-free Zr-based bulk metallic glass with potential for biomedical applications
2016，MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS
Berkovich nanoindentation of Zr55Cu30Al10Ni5 bulk metallic glass at a constant loading rate
2021，Journal of Non-Crystalline Solids
Microstructure and mechanical properties of composites of alumina and yttria-stabilized tetragonal zirconia prepared by liquid phase sintering
2005，Journal of the Chinese Ceramic Society

Source ：

Materials Science and Engineering C

ISSN： 0928-4931

Year： 2016

Volume： 66

Page： 268-277

4 . 1 6 4

JCR@2016

8 . 1 0 0

JCR@2023

JCR Journal Grade：2

CAS Journal Grade：3

Cited Count：

WoS CC Cited Count：

SCOPUS Cited Count： 44

ESI Highly Cited Papers on the List： 0 Unfold All

WanFang Cited Count：

Chinese Cited Count：

30 Days PV： 3

Affiliated Colleges：

Get Fulltext

DOI Library Discovery Baidu Scholar Search Engineering Village

Type
Departments

All Years Choose Year From to